VocoPro DA-3600Pro2 Rear Panel Descriptions, Model No, Video In, Effect, Mic Rec, Line, Dvd Cdg

Rear Panel Descriptions

7 8 9 10 11 12

110-120V	220-240V￿
voltage selector

		WWW.VOCOPRO.COM
		LA VERNE CALIFORNIA
		U.S.A.
		CAUTION:
		TO REDUCE THE RISK OF FIRE
		REPLACE WITH ONLY THE SAME
	AC IN	TYPE AND RATING OF FUSE.
		ATTENTION:
110-120V￿
220-240V￿		UTILISER UN FUBIBLE DE
		RECHANGE DE MEME TYPE.
50/60Hz

NOTE: DO NOT CONNECT MORE THAN

ONE SPEAKER PER SPEAKER JACK

SPEAKER SYSTEM

+ L -

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO AVOID ELECTRIC SHOCK PLEASE DON'T OPEN THE CABINET .

ANY P ART WITHIN THIS MACHINE, CAN'T BE REPAIRED BYE CUSTOMERS

THEMSELVES, PLEASE SUBMIT TO EXPERT FOR REPAIRS.

+ R - MODEL NO.

SERIAL NO. 20010-9300-0

MADE IN CHINA

VIDEO OUT		VIDEO IN
OUT	CDG DVD		QA:3
			PASS
OUT		INPUT	EFFECT
MIC REC	LINE	DVD CDG	OUT IN
			L
			R

7.MIC OUTPUT jacks – These jacks export MIC 1, 2 and 3 OUTPUT only, bypassing the source audio signal in ￿ order to provide connection to vocal effects units. Connect a paired RCA-ended patch cable from these jacks to ￿ appropriate INPUT jacks on the vocal effects unit.

NOTE: MIC OUTPUT from these jacks is dry. Pro-Echo and Echo effects will not be applied to this MIC ￿ OUTPUT, regardless of the master and channel echo settings in place.

8.REC OUTPUT jacks – These jacks provide connection to recording and other external audio devices. Connect a paired RCA-ended patch cable from these jacks to appropriate INPUT jacks on the recording or ￿ other audio/video device.

9.LINE OUTPUT jacks – These jacks provide connection to external audio/video devices. Connect a paired ￿ RCA-ended patch cable from these jacks to appropriate INPUT jacks on the external audio/video device.

10.DVD AUDIO INPUT jacks – Connect a paired RCA-ended patch cable from these jacks to the AUDIO OUT ￿ jacks on the device connected to the DVD channel.

11.CDG AUDIO INPUT jacks – Connect a paired RCA-ended patch cable from these jacks to the AUDIO OUT ￿ jacks on the device connected to the CDG channel.

12.EFFECT LOOP jacks – Use these loops jacks to connect an external effects unit, such as a key controller or ￿ EQ. After removing the LOOP-BARS, connect a patch cable from the OUTPUT jacks of your external effects ￿ unit to the EFFECT LOOP IN jacks. Connect a second patch cable from the INPUT jacks of your external ￿ effects unit to the EFFECT LOOP OUT jacks on the DA-3600 Pro.

NOTE: Do not discard the loop-bars. It is necessary for the loop-bars to be in place when there is no external ￿ effects unit being used.

12