5
Before Getting Started: Things to Consider
It is very important to read the following instructions prior to starting any installation
procedures. Doing so will ensure a correct installation and may save you some time as well.
Protect Against Power Surges
• Connect all external components before you plug any of their power cords into the
wall outlet.
• Turn off the DA-X888RV before you connect or disconnect any cables.
• Make sure all cables are properly grounded.
Protect Components from Overheating
• Don’t block ventilation holes. Arrange any components so that air can circulate freely.
• Don’t stack components.
• If you place the DA-X888RV on a stand, make sure you allow adequate ventilation.
Position Cables Properly to Avoid Audio Interference
• Insert each cable firmly into the designated jack.
• If you place components above the DA-X888RV, route all cables down the side of the
back of the DA-X888RV instead of straight down the middle of the back of the
DA-X888RV.
Important Stand and Base Safety Information
Choose the location for your DA-X888RV carefully. If the DA-X888RV is placed on a stand
or base, ensure that it is of adequate size and strength to prevent it from being accidentally
tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the
DA-X888RV.
You should have received the following items:
ITEMS:
DA-X888RV
Remote Control
RCA Patch cable
AAA Hi-Watt Batteries
(1)
(1)
(1)
(2)
QUANTITY:
AAA
AAA
UP
NATURAL
DOWN
UP
DOWN
MIC
#
L
b
L
KEY CONTROL
OFF
ON
UP
DOWN
MUSIC