Base operating weight (Standard equipment)
Weights shown include full cab with ROPS, all operating fluids and operator.
G726B
Total . . . . . . . . . . . . . . . . . . . 35,400 lb (16 057 kg) On front wheels . . . . . . . . . . 10,266 lb (4 657 kg) On rear wheels . . . . . . . . . . . 25,134 lb (11 401 kg)
Weight adjustments for various options are listed.
Typically equipped operating weight:
includes 14' x 25" x 7/8" (4 267 x 635 x 22 mm) moldboard and scarifier.
G726B . . . . . . . . . . . . . . . . . 37,420 lb (16 973 kg)
Productivity
(Standard equipment)
Maximum blade pull (no wheel slip, 0.85 traction
|
|
|
|
| Engine performance curve |
|
| ||
|
|
|
|
| torque vs. engine speed |
|
| ||
| 1200 |
| 800 |
|
|
|
|
|
|
| 1100 |
| 720 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 1000 |
| 640 |
|
|
|
|
|
|
| 900 |
|
|
|
|
|
|
| |
|
| 560 |
|
|
|
|
|
| |
(Nm)torqueGross | 800 | (lb.ft)torqueGross |
|
|
|
|
|
| |
240 |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
| 700 |
| 480 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 600 |
| 400 |
|
|
|
|
|
|
| 500 |
| 320 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 400 |
|
|
|
|
|
|
|
|
| 300 |
| 160 |
|
|
|
|
|
|
| 200 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
| 100 |
| 80 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 0 |
| 0 |
|
|
|
|
|
|
|
|
| 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 |
|
|
|
|
|
| Engine speed (rpm) |
|
|
|
Engine data |
| Tandems |
(continued) |
| |
|
|
Blade down force
• cutting capability
(ISO 7134) . . . . . . . . . . . . . 17,854 lb (8 099 kg)
Blade down force is the maximum downward force which may be applied at the cutting edge.
Engine data
Make/Model . . . . . . . . . . . . . . . . . . Volvo D7DGDE2 Type . . . . . . . . . 4 Cycle, Turbocharged, Aftercooled No. of cylinders . . . . . . . . . . . . . . . . . . . . . . In Line 6 Bore & stroke . . . . . 4.25" x 5.11" (108 x 130 mm) Displacement . . . . . . . . . . . . . . . . . 436 cu in (7,1 l) Maximum net engine output @ 2200 RPM
(per SAE J1349) . . . . . .
• Gears forward 1, 2 and
Reverse 1 . . . . . . . . . . . . . . . . . 205 hp (153 kW) Rated gross brake horsepower @ 2200 RPM
• Gears forward
Reverse
• Gears forward 1, 2 and
Reverse 1 . . . . . . . . . . . . . . . . . . 198 hp (148 kW) Torque @1100 RPM. . . . . . . . 664 lb.ft (900 N.m) Torque rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35%
Rated net brake horsepower @ 2200 RPM
• Gears forward
Reverse
All Wheel Drive engaged
Rated gross brake horsepower @ 2200 RPM
• All gears . . . . . . . . . . . . . . . . . . . 241 hp (180 kW) Rated net brake horsepower @ 2200 RPM
• All gears . . . . . . . . . . . . . . . . . . . 235 hp (175 kW) Torque @ 1400 RPM . . . . . 774 lb.ft (1 050 N.m) Torque rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34%
Performance: Rated net brake horsepower SAE standard J1349/ISO
Engine equipped with a two stage, dual element, dry type air cleaner with exhaust aspirator and service indicator. 24 volt starting and electrical system with 75 amp (1800 watt) brushless alternator with internal voltage regulator. Two heavy duty 12 volt maintenance free batteries with 660 cold cranking amps (CCA) and 160 minutes reserve capacity per battery. 950 CCA batteries available optionally. System includes battery disconnect.
Transmission
Make/Model . . . . . . . . . . . . . . . . . Volvo 8400
Fully sequential, direct drive, powershift transmission. Engine cannot be started if transmission is in gear. Single lever “Smart Shifter” electronic transmission controller provides
Ground speeds at 2200 RPM with standard tires:
Forward |
|
| Reverse |
|
|
Gears | mph | km/h | Gears | mph | km/h |
1 | 2.8 | 4,4 | 1 | 2.8 | 4,4 |
2 | 3.9 | 6,2 |
|
|
|
3 | 5.3 | 8,5 | 2 | 5.3 | 8,5 |
4 | 7.5 | 11,9 |
|
|
|
5 | 10.5 | 16,9 | 3 | 10.5 | 16,9 |
6 | 14.7 | 23,6 |
|
|
|
7 | 20.4 | 32,7 | 4 | 20.4 | 32,7 |
8 | 28.5 | 45,7 |
|
|
|
Transmission guard is standard equipment and is hinged for easy access.
Differential / Final drive
Make/Model . . . . . . . . . . . . . . . . . Volvo SR30
Single reduction final drive with an operator controlled lock/unlock differential. Rear axles are induction hardened, supported on double row spherical roller bearings.
Oscillating tandem case has internal gusseting for maximum torsional strength.
Depth . . . . . . . . . . . . . . . . . . . . . . 24.50" (622 mm) Width . . . . . . . . . . . . . . . . . . . . . . . 8.25" (210 mm) Thickness • inner wall . . . . . . . . . . . . 1.00" (25 mm)
• outer wall . . . . . . . . . . . . 0.75" (19 mm) Center distance. . . . . . . . . . . . . 61.50" (1 562 mm) Drive chain pitch . . . . . . . . . . . . . . . . 2.00" (51 mm) Oscillation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15º
Brakes
Service Brakes: Foot operated
Fade resistant, hydraulically actuated, oil disc service brakes located at the 4 tandem drive wheels are
Parking Brake
Spring applied hydraulic release independent, disc type parking brake on transmission output shaft and effective on all 4 tandem drive wheels. Includes visual and audible operator warning system for parking brake on, transmission in gear condition. Transmission will not engage with park brake on.
Braking systems to SAE Recommended Practice J1473 OCT. 90, and J1152 APR. 80; ISO
Wheels & tires
(Standard equipment)
Tire size . . . . . . . . . . . . . . . . . . . . . . 14:00 x 24,