|
| G930 |
Frame |
|
|
Front |
|
|
Minimum dimensions of box section | in (mm) | 10.5 x 13.5 (265 x 340) |
Plate thickness | in (mm) | .79 (20) |
Vertical section modulus at arch | cu in (cm3) | 119 (1 950) |
minimum | cu in (cm3) | 101 (1 663) |
maximum | cu in (cm3) | 212 (3 474) |
Rear |
|
|
Minimum dimensions | in (mm) | 10 x 4 (254 x 100) |
Plate thickness | in (mm) | .38 (9,6) |
Optional first user lifetime warranty on frame, includes maintenance free articulation pins and bearings.
Moldboard |
|
|
Standard moldboard with replaceable end bits | in | .87 x 25 x 12' |
| (mm) | (22 x 635 x 3 658) |
Moldboard material |
| SAE 1050 high carbon steel |
Edge: through hardened | in (mm) | 6 x 5/8 (152 x 16) boron steel |
Bolt spacing | in (mm) | 6 (152) |
Bolt size | in (mm) | 5/8 (16) |
Slide rails supported by Duramide™ bearings |
|
|
Moldboard range: Moveable Blade Control System |
|
|
(Dimensions shown with 14:00 tires and standard moldboard) |
| Left/Right |
|
|
|
Reach outside tires - articulated frame | in | 120/119.5 |
| (mm) | (3 048/3 035) |
Reach outside tires - straight frame | in | 80/79 |
| (mm) | (2 020/2 010) |
Moldboard slide | in | 26.5/26.5 |
| (mm) | (673/673) |
Circle side shift | in | 30.5/29.5 |
| (mm) | (775/749) |
Maximum bank sloping angle, left - right | degrees | 90º/90º |
Moldboard ground clearance | in (mm) | 17.5 (445) |
Moldboard cutting depth | in (mm) | 31 (790) |
Moldboard tilt range | degrees forward | 47º |
| degrees back | 5º |
Superior moldboard mobility permits steep ditch cutting angles and back sloping outside overall machine width.
2007.05
5
