Foot Controller Tour
A. THE TOP PANEL.
2. FX ON & OFF/CHANNEL SWITCH
1 2 | This switch does two things: |
|
|
|
| 1. Allows you to switch between PROGRAM |
|
|
|
| SELECT MODE (see page 6) and Individual |
|
|
|
| MODE (see page 7) with a mere tap of your foot. |
|
|
|
| How can you tell which mode is selected? Easy, |
|
|
|
| PROGRAM SELECT MODE is indicated by a |
|
|
|
| Bank number (1, 2, 3, 4 or 1., 2., 3., 4.) appear- |
|
|
|
| ing in the BANK DISPLAY, while INDIVIDUAL |
3 | 4 | 5 | 6 | MODE is indicated in the below diagram. |
|
1.BANK DISPLAY
This LED display window let’s you know what mode the
1.When the Foot Controller is in Program Select Mode, a Bank number (1, 2, 3, 4 or 1., 2., 3., 4.) is displayed. If this number is flashing it means you are about to select a new bank (see PRO- GRAM SELECT MODE section on page 6 for more details).
2.When the Foot Controller is in Individual Mode, the below appears in the BANK DISPLAY (see INDIVIDUAL MODE section on page 7 for more details).
3.When the Foot Controller is in Tuner Mode, either
or
4.If your Valvetronix combo has been put into Manual Mode (see your amp’s manual for more details) via it’s top panel (IMPORTANT NOTE: the amp can NOT be switched to MANUAL MODE using the
2.It also allows you to change program Banks. For more details please see the CHANGING PRO- GRAM BANKS section on page 6.
3.FOOTSWITCHES 1 – 4 & LEDS 1 – 4
What these bad boys do or don’t do depends on the MODE your
1.In Program Select Mode, these 4 switches allow you to change between Channels and Banks and the LEDs let you know what you’ve selected (see page 6 for more details).
2.In Individual Mode, these 4 switches allow you to switch the PEDAL, MOD, DELAY and REVERB sections of your amp on/off. The LEDs let you know at a glance what’s on and what’s off.
3.In Tuner Mode, these 4 LEDs plus the TAP TEMPO LED act as the “needle” on a tuner, with LED 3 being the “you’re exactly in tune” indicator (see page 8 for more details).
4.If your Valvetronix combo has been switched to Manual Mode, these switches allow you to switch the PEDAL, MOD, DELAY and REVERB sections of your amp on/off. The LEDs let you know at a glance what’s on and what’s off.
4