VTech 20-2481 Headset Operation connected to the Handset, Base Unit

Headset Operation

Your GIGAPHONE Handset is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for hands-free operation. If you choose to use the Headset option, you must obtain an optional accessory Headset, which is compatible with the GIGAPHONE.

To purchase a Headset, call VTECH Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm Headset, locate the Headset Jack on the GIGAPHONE Handset. Connect the plug on the Headset cord to the jack on the cordless Handset. The plug should fit securely. Do not force the connection.

Headset Operation connected to the Handset

			NOTE :
			Whenever a compatible Headset is
L1		L2	connected to the cordless Handset, the
FLASH	CLEAR	FLASH
1	2	3	microphone on the Handset will be
4	5	6
7	8	9	muted. This is done to limit the effect
*	0	#
			of background noise.
HANDSFREE	INTERCOM/	VOLUME
	TRANSFER
2.4GHz	GIGAPHONE
			Many compatible Headsets have a
			reversible, monaural design. You can
			wear your Headset on either ear,
			leaving one ear free for room
			conversation.

			Headset Operation connected to
			the Base Unit
			The same type of Headset can be
			connected to the Base Unit. Facing the
			Base, the Headset jack can be found
			on the near corner of the right side
1	2	3	panel.When using a Headset attached
7	8	9	to the Base, calls are		made and
4	5	6
	0	#	answered by pressing the HEADSET
			key. This key is also used to end your
			call. The Base Speakerphone and Base
			Headset	cannot	be	used
			simultaneously. However,			you can
			switch between the two modes
			without disconnecting your Headset.

Belt Clip

The GIGAPHONE is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the GIGAPHONE Handset. The belt clip should snap securely into place. Do not force the connection.

35

AdditionalInformation