Getting Started
Setup
Connecting Power to Handset Charger
Because the mi 6820 is an accessory handset to the mi 6821, mi 6822, mi 6861 mi 6862 or mi 6872 all you need to do is choose the location for your handset charger and plug in the power supply into an electrical outlet.
CAUTION: Use only the VTech power supply provided with your tele- phone.
Installation of Battery
1. Remove battery compartment cover by pressing on the indentation and sliding downward.
2. Place the battery in the handset aligning the two holes in the plug with the socket pins,then snap the plug into place.
3. Replace the battery cover by sliding it upwards.
4. If the new battery is not already charged, place the handset in its base unit or charger and allow it to charge for
5. Be sure to place the handset in its base or charger when not in use to insure maximum daily performance.
6. Average talk time on a fully charged battery is about nine hours, standby time is approximately four days.
5
