VTech MI6879 quick start Quick start guide

Quick start guide

mi6879

STEP 1 Check package contents

Make sure your phone’s packaging includes the following:

Telephone base Handset Battery

Telephone line cord Belt clip Quick start guide

Base power adaptor Wall mount bracket User’s manual

STEP 2 Connect power to telephone base

Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the connector into the power jack on bottom of the telephone base.

AC power outlet

NOTE:

•Use only the power adaptors supplied with your VTech telephone.

STEP 3 Battery installation

1.Align the two holes in the plug with the socket pins, then snap the plug into place. Place the battery in the compartment with the wires in the upper right corner.

2.Replace cover by sliding it upwards until it clicks into place.

STEP 4 Charge the battery

1. Place the handset in the telephone base.

STEP 5 Connect to phone line

Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Then plug the other

end of the cord into the wall telephone outlet.

Telephone outlet

STEP 6 Making and receiving calls

Making a call

•Press or SPEAKER and listen for dial tone.

•Dial the phone number.

-OR-

•Dial the phone number.

•Press .

Receiving a call

Press , SPEAKER, or any dialing key except OFF.

Hanging up

Press OFF or place the handset in its telephone base.

STEP 7 Set the clock

1.Press TIME/SET to listen to the current setting.

2.Press TIME/SET again to indicate changes needed.

3.Press CHANGE to change the day, hour, minute, or year.

4.When you hear the correct setting, press TIME/SET to advance to the next setting.

NOTE:

If you have caller ID service, the time will automatically be updated with the first incoming call after you program the year into the system.

STEP 8 Record your outgoing announcement

1.Press SETUP, the system announces “Announcement. Press PLAY or press RECORD. To continue setup, press SETUP.”

2.Press REC/MEMO and speak toward the MIC to record an announcement for up to 90 seconds.

3.Press PLAY/STOP / ( when finished recording).

NOTE:

For complete feature instructions, please refer to your user’s manual.

IMPORTANT!

If your product is not working properly:

1.Refer to your user’s manual.

2.Visit our website at www.vtechphones.com or in Canada, www.vtechcanada.com.

3.Call our customer service at 1-800-595-9511 or 1-800-267- 7377 in Canada.

96-006xxx-010-000