Getting Started
Enter Base ID Code
1. After charging the Handset, remove it from its Charge Cradle, the screen will display:
2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit.
3. Press OK. The Handset will display:
PLEASE WAIT!!
4. Wait approximately 15 seconds. The Handset will display:
FOUND BASE
If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4.
Congratulations! You can now enjoy the benefits of your VTECH
Registration
6
