Operating Instructions

ADJUSTING CUTTING HEIGHT

WARNING

Never adjust cutting height while the mower is moving. Before adjusting cutting height or servicing, move the Forward Speed Control (FSC) into the NEUTRAL-PARK position, engage the parking brake, and disengage the blade clutch (PTO). Tractor should not be moving while adjusting cutting height.

Cutting height is adjusted from operators seat using the height peddle to assist in raising the deck while positioning the height adjustment lever and hitch pin.

1.Disengage PTO and stop tractor.

2.Push down on height peddle until it latches in the full up position.

3.Select desired height by moving the hitch pin to the desired height.

4.Push down on the height peddle and lift up on the height adjustment lever. Slowly release the height peddle while lifting the lever until there is no pressure on the peddle.

Cutting Height Adjustment

Transport Position

1.Disengage the PTO.

2.Push down on height peddle until it latches in the full up position.

Height

 

 

 

Hitch Pin

Adjustment Lever

 

 

 

Height Peddle

Cutting Height Adjustment Components

30