Maintenance Instructions
REPLACING/REPAIRING/ ADJUSTMENTS
Reinstall the blades following procedure from Sharpen Mower Blades instructions. If blades are re- placed, always use Walker original equipment blades to ensure safety and optimum performance. The quality and performance of replacement blades offered by other manufacturers cannot be guar- anteed, they could be dangerous.
CAUTION
ALWAYS use genuine factory replacement parts. Substitute parts CAN result in product malfunction and possible injury to the operator.
ADJUSTMENTS
Steering Levers
An adjustment range of approximately 3 inches is available on the steering levers - the levers can be adjusted forward or aft depending on the arm length of the operator. The levers can be adjusted by loosening the locknut at the pivot point and the locknut holding the lever in position in the adjustment slide. Adjust levers into most comfortable position and tighten both locknuts.
Adjustment |
| Locknut |
Slide |
| (Position) |
|
|
|
Locknut
(Pivot Point)
Steering Lever Adjustment
When the carrier frame hinge joint is properly adjust- ed, the deck lock levers should move in and out of the engaged and disengaged positions freely. Adjustments are made by loosening the jam nut and tightening or loosening the set screws on the Deck Mount Pivot Brackets. Retighten the jam nut when the adjustment is complete.
Jam Nut
Set Screw
66