Operating Instructions
For Backrest adjustment, moving the adjustment handle upwards loosens the notching of the back- rest adjustment. Refer to Figure 3.
After the adjustment, the handle must lock in the desired position. It should not be possible to move the backrest into another position when it is locked.
For Armrest height adjustment, the armrests can be folded back if required and the height individually adjusted.
For adjusting the height of the armrest, pry out the round cap (arrow) of the cover and loosen the hexagon nut (size 13mm) situated behind it. Set the arm- rests in the desired position (5 steps) and tighten the hexagon nut. Replace the cap onto the nut. Refer to Figure 4.
For Lumbar Support adjustment, turning the knob upwards sets the curve in the upper part of the back upholstery. Turning the knob downwards sets the curve in the lower part of the upholstery. Refer to
Figure 5.
IMPORTANT: Dirt can impair the function of the seat, so make sure you keep your seat clean!
For cleaning, use a standard commercially available upholstery or plastics cleaning agent. Test first for compatibility on a small, concealed area.
Figure 5
Figure 1
Remove
Cover
Figure 4
Figure 2
Figure 3
34