Maintenance Instructions | REPLACING/REPAIRING |
Jackshaft Drive Belt
1.To remove the jackshaft drive belt:
a.Remove the engine PTO drive belt, as described in previous section.
b.Relax the belt by depressing the spring- loaded idler arm.
c.Roll the belt off the jackshaft pulley and remove.
Jackshaft | Push Idler Pulley Down to Relax Belt | |
Idler Pulley | ||
| ||
| Engine | |
Jackshaft | Pulley | |
| ||
Drive Belt |
| |
| Tension Spring |
Jackshaft Drive Belt (Disengaged)
2.Reverse the removal procedure to replace the jackshaft drive belt.
Jackshaft Idler Arm
Engine
Pulley
Jackshaft
Drive Belt
Tension Spring
Jackshaft Drive Belt (Engaged)
79