Assembly Instructions
Spring Tension Adjustment Nut
Located Under Lower
Spring Hook (not visible)
Counterweight Springs
Clip Onto Body
With Body Tilted Up
Hitch Pins
Lock Deck On
Support Arms
Deck Counterweight Spring Installation
6.Raise mower body (instead of lifting the front of deck) and clip the counterweight springs to the receptacle on front of body. Lower the body to tension the springs. (Refer to Deck Counter- weight Spring Installation photo.)
7.With the counterweight springs connected, the weight on the deck caster wheels should be 15 to 25 Ib (6.8 to 11.3 kg). Check this weight by lift- ing on the front of the deck carrier frame. If required, the spring tension can be adjusted by tightening or loosening the elastic stop nuts lo- cated underneath the lower spring hook. Refer to Deck Counterweight Spring Installation photo.
20