General Information

HIGHLIGHTED INFORMATION

Walker Manufacturing recommends that any service requiring special training or tools be performed by an authorized Walker Mower Dealer. There are several general practices to be aware of in the area of safety. Most accidents associated with the operation or maintenance of a Walker product are caused by disregarding basic safety precautions or specific warnings. Such accidents, in most cases, can be prevented by being aware of the dangers present.

Information of special importance has been highlighted in bold type in this manual. Refer to Safety Instructions for the meanings of DANGER, WARN- ING, CAUTION, IMPORTANT, and NOTE.

GLOSSARY

There are many terms that are either unique to this equipment or that are used as acronyms. The following terms and their definitions will help while using this manual:

FORWARD SPEED CONTROL (FSC) controls the maximum forward speed of the tractor; func- tioning as a cruise control.

LEFT HAND (LH) refers to the left-hand side of the tractor when the operator is seated facing forward in the tractor seat.

MACHINE consists of the implement installed on the tractor, functioning as a single unit.

POWER TAKE-OFF (PTO) transmits engine power to run the PERFAERATOR™.

RIGHT HAND (RH) refers to the right-hand side of the machine when the operator is seated fac- ing forward in the tractor seat.

TRACTOR is the prime mover, including the en- gine, drivetrain, operator seat, and controls to operate the implement.

IDENTIFYING NUMBER LOCATIONS

The PERFAERATOR™ serial number is affixed to RH side of the inside of the unit housing. Model and serial numbers are helpful when obtaining replacement parts and maintenance assistance. For ready reference, please record these numbers in the space provided.

PERFAERATOR™ Model No.

PA6685

PERFAERATOR™ Serial No. _______________

Fill In By Purchaser

Serial

Number Plate

Aerator Serial Number Location

SERVICING OF DRIVETRAIN GEARBOX

Detailed servicing and repair of the gearbox used on the PERFAERATOR™ is not covered in this manu- al. Only routine maintenance and general service instructions are provided. For the service of the gearbox during the limited warranty period, it is important to find a local, authorized servicing agent of the component manufacturer. Any unauthorized work done on these components during the warranty period may void the warranty. If you have any difficulty finding an authorized outlet or obtaining warranty service, please contact our Service Department for assistance:

Walker Manufacturing Company

5925 E. Harmony Road

Fort Collins, CO 80528

1-970-221-5614

Gearbox manufacturer's information is:

Bondioli & Pavesi

10252 Sycamore Drive

Ashland, VA 23005-8137

804-550-2224

2