Safety Instructions
12.Disengage the PTO clutch when transporting the machine.
13.Do not operate across the face of slopes. Use extreme caution when changing direction on slopes.
14.Never adjust tine depth with the engine run- ning. Before adjusting tines or servicing, disen- gage the PTO clutch, stop the engine, and remove the ignition key. Wait for all movement to stop before getting off the seat.
NOTE: The PTO brake should normally stop drive line rotation within 5 seconds of disengag- ing the PTO clutch.
15.Do not operate the aerator with the covers open.
16.If the aerator tines do not move when the PTO is engaged:
a.Disengage the PTO clutch, stop the engine, and remove the ignition key before leaving the seat.
b.LOOK to make sure PTO shaft and the tine movement has stopped before servicing any area of the machine.
c.Disconnect the fuel solenoid wire [diesel en- gines] or spark plug wire(s) [gasoline en- gines].
17.If the implement strikes a solid object or the ma- chine begins to vibrate abnormally, immediate- ly disengage the PTO clutch, stop the engine, and wait for all moving parts to stop. Disconnect the fuel solenoid wire [diesel en- gines] or the spark plug wire(s) [gasoline en- gines] to prevent accidental starting. Thoroughly inspect the implement and repair any damage before restarting the engine and operating the machine. Make sure implement components are in good condition and all bolts are tight.
18.Do not touch the engine or muffler while the engine is running or immediately after stop- ping the engine. These areas may be hot enough to cause serious burns.
19.When leaving the machine unattended, disen- gage the PTO clutch, stop the engine, and re- move the ignition key.
MAINTENANCE
NOTE: Refer to the Walker Rider Lawnmow- ers OWNER’S MANUAL for proper tractor
maintenance procedures.
1.To prevent accidental starting of the engine when servicing or adjusting the machine, re- move the key from the ignition switch and dis- connect the fuel solenoid wire [diesel engines] or the spark plug wire(s) [gasoline engines].
2.To reduce fire hazards, keep the engine free of grass, leaves, excessive grease, and dirt.
3.Keep all nuts, bolts, and screws tight to ensure the machine is in a safe, working condition.
4.Perform only maintenance instructions de- scribed in this manual. Unauthorized mainte- nance operations or machine modifications may result in unsafe operating conditions.
5.If the engine must be running to perform a main- tenance adjustment, keep hands, feet, and clothing away from moving parts. Do not wear jewelry or loose clothing.
6.Always use proper engine service manuals when working on the engine. Unauthorized maintenance operations or modifications to the engine may result in unsafe operating condi- tions.
7.Altering the machine in any manner which ad- versely affects its operation, performance, dura- bility, or use will VOID the warranty and may cause hazardous conditions.
8.Never attempt to disconnect any safety devices or defeat the purpose of these safety devices.
9.Do not change the engine governor settings or overspeed the engine. The governor has been
10.Use genuine factory replacement parts. Substitute parts may result in product malfunc- tion and possible injury to the operator and/or others.
IMPORTANT: Keep all applicable manuals immediately accessible to anyone who may operate or service this machine.
7