Assembly Instructions
PREOPERATING CHECKLIST
Before operating the snowblower for the first time, and as a routine before daily operations, it is important to make sure the snowblower is properly prepared and ready for operation. The following is a list of items to be checked. (For a snowblower with frequent operation, some of these items will not need to be checked every day, but the operator should be aware of the condition of each.)
CHECK TRACTOR PREOPERATING
CHECKLIST
Refer to the appropriate Tractor Owner’s Manual.
CHECK AUGER
•Make sure the auger is clear of snow and/or ice.
•Make sure the auger is free to rotate.
•Check that the auger flighting and paddle blades are in good condition and not bent.
CHECK GEARBOX
Refer to LUBRICATION of Gearbox in Maintenance
Instructions.
CHECK DRIVE CHAIN
•Refer to ADJUSTMENTS of Drive Chain in
Maintenance Instructions.
•Refer to LUBRICATION of Drive Chain in
Maintenance Instructions.
CHECK LIFT HANDLE AND FOOT TRIGGER OPERATION
Raise and lower the snowblower to make sure the lift handle and foot trigger operate properly.
CHECK BLOWER SPOUT
•Make sure the blower spout is not clogged with snow and/or ice.
•Pull back on the spout position control handle and rotate the blower spout. The blower spout should rotate freely and should lock in place when the spout position control handle is released.
•Use the deflector position control handle and raise and lower the deflector. The deflector should move freely.
CHECK GAUGE WHEEL OR SKID SHOE ADJUSTMENT
Refer to ADJUSTMENTS of Gauge Wheels or Skid Shoes in Maintenance Instructions.
CHECK OPTIONAL TIRE CHAINS
Tire chains should always be used when operating the machine in icy conditions. If the tractor is equipped with the optional tire chains, make sure the chains are in good condition and are installed properly.
CHECK TRACTOR TAILWEIGHT
Make sure 80 lb (36 kg) weight has been installed on rear of tractor.
14