Operating Instructions
Instrument Panel
This illustration shows the configuration of the switches and indicators located on the instrument panel.
|
|
|
| Oil Pressure |
| Over Temperature |
Hourmeter |
| Voltmeter |
| Warning Light |
| Warning Light |
Ignition
Switch
Engine
Service
Light
Light Switch |
| 7 AMP |
|
| |
(Optional) |
| Circuit Breaker |
|
| |
Warning | |||||
|
|
|
| ||
|
| Instrument Panel | Horn | ||
|
|
| |||
Hourmeter
The hourmeter, which is located on the instrument panel, displays operating time accumulated while the ignition switch is in the RUN position.
The hourmeter provides maintenance reminders after certain hours of operation. The hourmeter screen will start flashing the reminder one hour prior to the recommended interval and will continue until one hour after the recommended interval (two hours). The hourmeter does not have a manual reset function.
Procedure | Interval* | Reminder | ||
|
|
|
| |
Oil Change |
| C |
| |
H | OIL | |||
| G |
| ||
|
|
| ||
Lubricate |
|
| LUBE | |
and Check |
| |||
Levels |
|
|
| |
|
|
|
| |
Oil Change | C | OIL | ||
H | ||||
|
| G |
| |
*These intervals reflect the actual time that the reminder will flash (one hour prior to and one hour after the recommended interval).
**This reminder is only used one time.
***In normal operating conditions, oil changes in
31