The symbol

WARNING & SAFETY INFORMATION

Please read this manual carefully, it provides important information about the safety, installation, use and main- tenance of the appliance. The manufacturer cannot be considered responsible for any damage caused by improper, incorrect or unreasonable use.

WARNING! Do not connect the appliance to the mains until the installation is fully complete.

ELECTRICAL CONNECTION

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. A double-pole switch must be fitted in accordance with the relevant standards.

Attention: Replacing the supply cable must be carried out by a Qualified Electrician or an Authorised Service Agent.

The appliance is only intended for use by competent persons. Children should be supervised to ensure that they do not play with the appliance. Never use the hood without being securely fixed using the brackets sup- plied. The hood must never be used as a support surface unless specifically indicated. If the appliance is fit- ted in a room with one or more appliances that require an air supply, an adequate air supply must be provided so that these appliances can function simultaneously at maximum operation. If venting outside, the vent pipe must run direct from the hood to an external wall.

The use of exposed flames beneath the hood is detrimental to the filters and may cause a fire risk, and must be avoided at all times. Waterford Stanley recommend a distance of 650-750mm between the cooking appli- ance and the hood, see Installation Section provided in this manual.

The hood must be regularly cleaned on both the inside and outside AT LEAST ONCE A MONTH.

MAINTENANCE

ATTENTION! Before performing any maintenance, isolate the hood from the electrical supply.

Grease Filter

This must be cleaned once a month using a non aggressive detergent, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.

REPLACING LAMPS

Warning! Ensure light bulbs are cool before touching. Ensure all lamps are correctly fitted to the hood at all times to avoid a possible safety hazard.

This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environ- mental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

1

Page 1 Page 3
Page 2
Image 2
Waterford Precision Cycles Chimney Hood manual Electrical Connection, Grease Filter
Page 1 Page 3

Chimney Hood specifications

Waterford Precision Cycles has long been synonymous with high-quality, handcrafted bicycles, and their Chimney Hood is no exception. This unique and innovative product stands out in the cycling world, combining advanced technology with exceptional craftsmanship to enhance the cycling experience for enthusiasts of all levels.

The Chimney Hood features a distinctive design that not only emphasizes aesthetics but also functionality. Constructed from high-grade materials, it is lightweight yet exceptionally sturdy, ensuring that it can withstand rigorous use under various weather conditions. One of its main features is the aerodynamic profile, which reduces wind resistance, allowing cyclists to gain speed without expending additional energy.

A key technology integrated into the Chimney Hood is its effective ventilation system. This feature is designed to maximize airflow while minimizing drag. The strategically placed vents ensure that crucial airflow is maintained, allowing cyclists to remain cool during intense rides without sacrificing performance. Additionally, the Chimney Hood is equipped with a unique moisture-wicking lining that helps to manage sweat, keeping the rider dry and comfortable throughout their journey.

Another significant characteristic of the Waterford Chimney Hood is its versatility. It is engineered to fit a wide range of bicycle models, making it an ideal accessory for cyclists who own multiple bikes. The adjustable straps and secure fastening system ensure that it can be mounted easily and confidently, enabling quick transitions from one bike to another.

In terms of aesthetics, the Chimney Hood is available in an array of colors and designs that cater to individual preferences. Waterford's attention to detail is evident in the quality of the finishes, ensuring that each product not only performs exceptionally well but also looks great while doing so.

Moreover, the Chimney Hood embodies Waterford's commitment to sustainability, as it is produced with eco-friendly materials and practices. This commitment not only benefits the environment but also appeals to the growing community of environmentally conscious cyclists.

In conclusion, the Waterford Precision Cycles Chimney Hood is more than just an accessory; it is an essential component that enhances the cycling experience through its innovative features, advanced technologies, and stylish design. Whether for casual rides or competitive racing, this product ensures that cyclists can perform at their best while enjoying the ride.
Top Page Image Contents