The symbol

WARNING & SAFETY INFORMATION

Please read this manual carefully, it provides important information about the safety, installation, use and main- tenance of the appliance. The manufacturer cannot be considered responsible for any damage caused by improper, incorrect or unreasonable use.

WARNING! Do not connect the appliance to the mains until the installation is fully complete.

ELECTRICAL CONNECTION

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. A double-pole switch must be fitted in accordance with the relevant standards.

Attention: Replacing the supply cable must be carried out by a Qualified Electrician or an Authorised Service Agent.

The appliance is only intended for use by competent persons. Children should be supervised to ensure that they do not play with the appliance. Never use the hood without being securely fixed using the brackets sup- plied. The hood must never be used as a support surface unless specifically indicated. If the appliance is fit- ted in a room with one or more appliances that require an air supply, an adequate air supply must be provided so that these appliances can function simultaneously at maximum operation. If venting outside, the vent pipe must run direct from the hood to an external wall.

The use of exposed flames beneath the hood is detrimental to the filters and may cause a fire risk, and must be avoided at all times. Waterford Stanley recommend a distance of 650-750mm between the cooking appli- ance and the hood, see Installation Section provided in this manual.

The hood must be regularly cleaned on both the inside and outside AT LEAST ONCE A MONTH.

MAINTENANCE

ATTENTION! Before performing any maintenance, isolate the hood from the electrical supply.

Grease Filter

This must be cleaned once a month using a non aggressive detergent, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle. When washed in a dishwasher, the grease filter may discolour slightly, but this does not affect its filtering capacity.

REPLACING LAMPS

Warning! Ensure light bulbs are cool before touching. Ensure all lamps are correctly fitted to the hood at all times to avoid a possible safety hazard.

This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environ- mental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

1

Page 1 Page 3
Page 2
Image 2
Waterford Precision Cycles Glass Island Hood manual Electrical Connection, Grease Filter
Page 1 Page 3

Glass Island Hood specifications

The Waterford Precision Cycles Glass Island Hood represents a pinnacle in cycling technology, combining advanced materials with innovative design features to enhance both performance and comfort. As cyclists seek to optimize their riding experience, the Glass Island Hood serves as a standout component in this quest.

One of the standout features of the Glass Island Hood is its lightweight construction. Utilizing cutting-edge materials, this hood significantly reduces overall bike weight without compromising durability. The use of high-strength, lightweight carbon fiber not only decreases weight but also enhances the responsiveness of the bike, allowing for quicker acceleration and better handling.

Another notable characteristic of the Glass Island Hood is its aerodynamic design. Engineers at Waterford Precision Cycles have meticulously crafted the hood to minimize drag while maintaining an aggressive riding position. This sleek profile helps cyclists maintain higher speeds with less energy expenditure, making it ideal for both competitive riders and enthusiasts aiming to improve their overall performance.

Comfort is paramount in long-distance cycling, and the Glass Island Hood excels in this area. The ergonomically shaped hood ensures a natural hand position, reducing stress on the wrists and enhancing grip. Additionally, the integration of vibration-damping technologies helps to absorb road shock, providing a smoother ride over rough terrain. This characteristic allows cyclists to ride longer distances without experiencing discomfort, ultimately making for a more enjoyable cycling experience.

Moreover, the Glass Island Hood boasts a customizable fit, accommodating a range of hand sizes and preferences. With an adjustable design, riders can easily personalize their setup to match their individual needs, ensuring optimal control and comfort.

Waterford Precision Cycles has incorporated advanced technologies into the Glass Island Hood, including smart integration capabilities for accessories. Riders can seamlessly attach lights or other gadgets, enhancing safety and functionality on their rides.

In summary, the Waterford Precision Cycles Glass Island Hood is a transformative cycling accessory that blends lightweight materials, aerodynamic design, and comfort-enhancing technologies. It is expertly crafted for cyclists who demand performance, style, and unparalleled riding experience. As cycling continues to evolve, the Glass Island Hood sets a new standard for what cyclists can expect from their gear.
Top Page Image Contents