Applications and Technical Data
Specifications
Weight: Under 6.5 lbs/ft2 (31.75 kg/m2)
Voltage and Wattage: Ratings are based on the ceramic fiber heater module, which is mounted in the case. Up to 600VÅ(ac) is possible.
Terminals: Terminals are
Mounting Legs
•One inch (25 mm) standard
•Three inches (76 mm) optional from stock. For
Application Hints: A thermocouple mounting clamp will be provided on one end of the case, with holes on both ends for alternate locations. The standard clamp can be used with
3⁄16 inch (4.8 mm) high, but can be removed for flush mounting*. The maximum recommended surface temperature of the heater is based on the rating of the ceramic fiber heater module. This can vary from 1095°C (2000°F) at lower watt densities, to higher watt densities at reduced surface temperatures. Note that maximum wattages cannot be achieved at the maximum temperatures simultaneously.
Heater Dimensions |
| Min. | Max. | Increments | |
|
|
|
|
|
|
Width: inches (mm) | 2 | (51) | 30 | (760) | Any |
Length: inches (mm) | 6 | (152) | 52 | (1320) | Any |
|
|
|
|
|
|
Note: Units will be 1⁄4 inch (6 mm) wider than the nominal size of the ceramic fiber heater. Overall length is equal to heater length, but thermocouple clamp not included in length.
Options
Several options are available with RAYMAX 1220 and 2030 models. Consult Watlow for more information on any of the options.
•
•Terminal box
•Zoning
•Mounting studs and legs
•
•Thermocouple mounting tubes
•Alternate case materials
How to Order
To order a stock, assembly stock, or standard heater, specify:
•RAYMAX 1220 or 2030
•Quantity
•Watlow code number (from Watlow heater's catalog)
•Mounting studs, if desired
Note:
If our stock or standard units do not meet your application needs, Watlow can manufacture radiant heaters to your special requirements.
For
• | Heated width and length and overall size |
• | Total wattage |
• | Voltage, and phases or zones required |
• | Load temperature expectations |
• | Mounting studs, if desired |
• | Mounting legs and leg height, if desired (one inch is |
Overall Width =
Heated Width +1/4 in. (6 mm)
± 1/16 in. (1.5 mm)
|
| 1/4 in. |
| 1/8 in. (3 mm) T/C Clamp | |
9/32 in. X 1/2 in. Slot (7 mm X 12 mm) |
| |
| 2 1/2 in. | 3/8 in. (9 mm) |
3/8 in. | (64 mm) |
|
|
| |
(9 mm) | L | 1 3/16 in. (30 mm) |
| ||
3/8 in. |
| A B |
(9 mm) |
|
|
| 7/8 in.(22 mm) | 11/2 in. (38 mm) |
Overall Length = |
|
|
Heated Length |
|
|
±1/16 in. (1.5 mm) |
|
|
| 1 | 13/16 in. (30 mm) |
| 1 /2 in. |
|
| (38 mm) |
|
| provided unless otherwise specified) |
• | Location of terminals |
• | Terminal box, if desired |
• | Thermowell (specify size and location if standard end |
| clamp is not sufficient) |
Supplying a drawing with an order or request for quotation can be very helpful in clarifying design information.
Availability
Stock: Shipment in one to two days
Assembly Stock: Shipment in two weeks
Standard: Shipment in three to four weeks
*1⁄8 inch (3.2 mm) is standard. 3⁄16 inch (4.8 mm) and 1⁄4 inch (6 mm) are available upon request.
Made-to-Order: Consult Watlow
To be automatically connected to the nearest North American Technical and Sales Office call:
1-800-WATLOW2
International Technical and Sales Offices: China, +86 (21)
Italy, +39 (02)
United Kingdom, +44 (0)