Wayne-Dalton specifications Models C24 & C20 Specifications pg.2, Part Iii- Execution

Models C24 & C20 Specifications pg.2

1/8" or 1/4" glazing in a choice of materials set in automotive rubber beading, 20 ½" x 4 ½"). Prepainted aluminum full view sections also available with various choices of glazing materials.

2.07Weatherstripping

A)Optional factory-installed foam joint seal is available. Optional field-installed exterior jamb/perimeter seal is available.

2.08Insulation

A)As specified will be 1-5/8" polystyrene secured in sections and muntins without the use of muntin clips and pop rivets. Inside backup sheets will be white prepainted (embossed steel), (vinyl).

2.09Windload

A)Per DASMA 102-2003 and as required by local codes.

2.10Options

A)Chain hoist or motor operator.

PART III- EXECUTION

3.01Install

A)Install the doors in accordance with Wayne-Dalton Corp. instructions and standards. Installation will be by authorized Wayne-Dalton representative.

©2004 Wayne-Dalton Corp. 8/2003