Step 7
Install side burner locks
Note: The locks are taped to the inside of the side burner lid.
You will need: frame assembly, two side burner locks and a 7/16 inch wrench.
Slide the cooking box to the left within the frame. Put the washer on the bolt. Take the spacer bracket and hold it up to the frame making sure both tabs fit underneath the frame cross piece. Figure 8 (a). Insert the bolt through the center hole in the spacer bracket, frame and cooking box with the head of the bolt outside the spacer bracket. Figure 8 (b). Add keps nut. Tighten by holding the bolt with pliers while you tighten the nut with the 7/16 inch wrench.
Turn frame assembly right side up.
Loosen the right rear 1/4 x 20 bolt. Install the side burner lock. The “U” shape cut out of the lock slips down over the bolt. Tighten with a wrench. Figure 6 (a).
Spacer (a) bracket
Frame cross piece
Loosen the right front 1/4 x 20 bolt. The side burner lock fits between the front panel and the frame. The “U” shape cut out slips up over the bolt. Tighten with a wrench. Figure 6 (b).
(a)
(b)
Figure 6
Step 8
Add cooking box
You will need: frame assembly, cooking box assembly, spacer bracket,
Uncoil the hose.
Set the cooking box into the frame so the burner tubes are under the frame brace. Figure 7.
Burner tubes
Frame brace
(b)
Keps nut
Nylon
Bolt washer
Figure 8
Tab
Figure 7
12
