MAINTENANCE 35
12.Lift and twist the burner assembly slightly, to separate the Crossover® tube (a) from the burners (b).
13.Remove the Crossover® tube.
14.Pull the selected burner(s) tube(s) from manifold frame and replace with a new burner tube.
15.To reinstall the manifold assembly, reverse steps 7 through 14.
CAUTION: The burner openings (1) must be positioned properly over the valve orifices (2).
Check proper assembly before fastening manifold in place.
WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill. (See, “Check for gas leaks.”)
(b)(b)
(a)
(2) |
(1) |
