Weber 39950 manual Continue Frame Assembly

6 ASSEMBLY

3 CONTINUE FRAME ASSEMBLY

You will need: Frame assembly, two wheels, two hubcaps, axle, Tuck-Away frame support, hammer, a block of wood, pliers and a 7/16 inch open-end or an adjustable wrench.

Place one end of axle on block of wood (or other protected surface). Tap on one hubcap. Put one wheel on axle, WEBER side toward hubcap (1).

(1)

Slide axle through the frame, Tuck-Away frame support, [make sure slot is facing up (2)], and through other end of frame. Add other wheel (WEBER side toward the hubcap) and tap on hubcap.

Finish tightening bolt in center of frame assembly.

(2)