MAINTENANCE
12.Lift and twist the burner assembly slightly to separate the crossover tube from the burners. Remove the burners from the cooking box. Figure 13.
Separate here
Crossover tube
Figure 13
13. To reinstall the burners, reverse steps 3 through 12.
mCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 14 (a).
Check proper assembly before fastening manifold in place. Figure 14 (b).
(a)
Valve
Burner
(b)
Figure 14
Crossover Ignition System Operations
If the Crossover Ignition System fails to ignite the Left burner, light the Left burner with a match. If the Left burner lights with a match, then check the Crossover Ignition System.
■Check that both the white and black ignition wires are attached properly. Figure 15.
■Check that the Crossover Ignition button pushes the igniter (button) down, and returns to the up position.
■Check to see if the igniter is loose in the frame. Tighten if necessary; See Step “Install igniter” for correct procedure.
If the Crossover Ignition System still fails to light, contact
White wire
Black wire
Figure 15
12
