Weber 41996 manual Rotisserie Assembly, Put the spit forks on the rotisserie shaft

	Operating Instructions
Rotisserie Assembly		3) Put the spit forks on the rotisserie shaft.
		Slide a spit fork from each side onto the shaft so that
Parts required: rotisserie motor bracket(1), rotisserie		the tines are facing each other. Reverse forks to each
		other so that one fork screw is on top(1) and one is on
motor(1), rotisserie shaft(1), spit forks(4)
		the bottom(2), as shown in illustration. Screw in the
and fork screws (4).
		split fork screws to hold the forks in place.

1) Install the motor bracket
Attach the stainless steel motor bracket to the left side
of the cooking box, using the 1/4-20 fasteners and the	(1)
1/4-20 Keps nuts.
	(2)

4) Insert the rotisserie shaft in the motor.

Insert the pointed end of the rotisserie shaft into the motor.

	5) Set the rotisserie shaft onto rotisserie support
2) Attach the motor.	block.
Slide the motor onto the motor bracket.	Place the handle(1) end of rotisserie onto the support
	rollers.

(1)

D-9