Manuals / Weber / Outdoor Cooking / Gas Grill

Weber 43146 Main Burner Snap Ignition, Main Burner Lighting, Main Burner Manual Lighting

Models: 43146

1 24
Download 24 pages 9.29 Kb
Page 13
Image 13

OPERATING INSTRUCTIONS

13

 

 

LIGHTING

Summary lighting instructions are inside the left hand cabinet door.

DANGER

Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

MAIN BURNER SNAP IGNITION

Note: Each control knob snap igniter creates a spark from the igniter electrode to the burner lighting tube. You generate the energy for the spark by pushing in the control knob and turning to “START/HI”. This will ignite each individual burner.

WARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

1)Open the lid.

2)Make sure all burner control knobs are turned to “OFF”. (Push control knob in and turn clockwise to ensure that it is in the “OFF” position.)

3)Turn on the gas supply at source.

WARNING: Do not lean over the open barbecue.

4)Push the control knob in and turn to “START/HI” until you hear the igniter snap - continue to hold control knob in for two seconds. This action will spark the igniter, the burner lighting tube and then main burner.

5)Check that the burner is lit by looking through the cooking grates. You should see a flame. If burner does not light on first try, push control knob in and turn to OFF. Repeat lighting procedure a second time.

WARNING: If the burner still does not light, turn the burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again or try to light with a match.

MAIN BURNER LIGHTING

1

5

2 4

*The grill illustrated may have

slight differences than the

3

 

 

 

model purchased.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO EXTINGUISH

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

MAIN BURNER MANUAL LIGHTING

DANGER

Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

1)Open the lid.

2)Make sure all burner control knobs are turned to “OFF”. (Push each knob in and turn clockwise to ensure they are in the “OFF” position.)

3)Turn on the gas supply at source.

4)Put match in the match holder and strike match.

WARNING: Do not lean over open barbecue.

5)Insert match holder and lit match down through cooking grates and Flavorizer® bars to ignite the selected burner.

6)Push the control knob in and turn to “START/HI”.

WARNING: If the burner does not light, turn burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again.

TO EXTINGUISH

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

MAIN BURNER MANUAL LIGHTING

1

6

2 5

*The grill illustrated may have

 

slight differences than the

3

model purchased.

WWW.WEBER.COM®

Page 12 Page 14
Page 13
Image 13
Weber 43146 manual Main Burner Snap Ignition, Main Burner Lighting, Main Burner Manual Lighting, To Extinguish
Page 12 Page 14

43146 specifications

The Weber 43146 is a highly regarded grill cover designed specifically for Weber's Spirit II and Spirit grill models. This thoughtfully engineered accessory is essential for anyone looking to protect their grill from the elements and ensure its longevity.

One of the main features of the Weber 43146 grill cover is its durable construction. Made from high-quality, weather-resistant material, it safeguards the grill against rain, snow, and UV rays, which can cause fading and deterioration over time. The cover is also designed to fit snugly around the grill, preventing it from blowing away even in strong winds. This form-fitting design not only provides protection but also maintains the aesthetic appeal of your outdoor space.

In terms of technology, Weber has implemented advanced fabric technology in the 43146 cover. The material is specifically engineered to resist water while allowing moisture to escape, preventing rust and mold buildup on the grill. Additionally, the cover comes with reinforced stitching and is designed to withstand extreme temperatures, making it reliable in various weather conditions.

Another characteristic of the Weber 43146 is its ease of use. The cover features convenient handles that make it simple to put on and remove, allowing for quick access to your grill when you’re ready to cook. Its lightweight yet sturdy design means that users can handle it without difficulty, ensuring that grilling remains a hassle-free experience.

Compatibility is another key feature of the Weber 43146. It is designed to fit perfectly on various models of the Spirit series, ensuring that your investment is well protected. This versatility means that whether you own a compact unit or a larger grill, the cover will snugly accommodate your appliance.

Overall, the Weber 43146 grill cover is an essential accessory for grill enthusiasts. Its durability, innovative fabric technologies, and user-friendly design make it a must-have for protecting an outdoor grill. With the Weber 43146, you can enjoy peace of mind knowing your grill will remain in pristine condition, allowing you to focus on what really matters—creating delicious meals for family and friends in your backyard.