Weber 500 Series owner manual Assembly, Step, Check package contents

Assembly

Step 1

Tools needed

Hammer

Check package contents

Phillips screwdriver

Cooking box (assembly)

7/16 and 3/4 inch open-end or an adjustable wrench

Pliers	Lid
	(assembly)
	®
	®
Block of wood

Supplies needed

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the W eber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner ’s manual and serial number of the barbecue available for reference.

Hose

Bottom tray

Two cooking grates

Control panel

Molded work table

Five Flavorizer Bars

7