Weber 89839 manual Sideburner Troubleshooting, Side Burner Maintenance

	SIDEBURNER TROUBLESHOOTING		13
PROBLEM	CHECK	CURE
Side Burner burns with a yellow or	Inspect side burner orifice alignment	Loosen orifice and re-align orifice parallel to the side burner tube (3).
orange flame, in conjunction with the	(Position of orifice to side burner tube.)	(See Section “Side Burner Maintenance”)
smell of gas.
Side Burner does not light.	Is gas supply off?	Turn supply on.
Flame is low in “HI” position	Is the fuel hose bent or kinked?	Straighten hose.
Push button ignition does not work.	Does burner light with a match?	If match lights burner, check igniter (see below).

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

SIDE BURNER MAINTENANCE

WARNING: All gas controls and supply valves should be in the “OFF” position.

Make sure black wire is connected between the igniter and electrode. Make sure white wire is connected between the igniter and grounding clip. Spark should be a white/blue color, not yellow.

1) Igniter Wire

2)Ground wire

3)Burner

Side Burner Grate

Head Retention Clip

Side Burner Ring & Head

Igniter Electrode

Control Knob

Igniter Button

(3)

(2)

(1)

(2)

(1)

WARNING: The side burner orifice

(4)must be parallel to the side burner tube opening (5).

(4)

(5)

WWW.WEBER.COM®