TROUBLESHOOTING POINTS

PROBLEM

CAUSE

CORRECTION

Engine continues to run

1.

Faulty operator-safety presence control system.

1.

Check wiring, switches and connections. If not

when operator leaves

 

 

 

corrected, contact an authorized service center/

seat with attachment

 

 

 

department.

clutch engaged

 

 

 

 

 

 

 

 

 

Poor cut - uneven

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten blade bolt.

 

2.

Mower deck not level.

2.

Level mower deck.

 

3.

Buildup of grass, leaves, and trash under mower.

3.

Clean underside of mower housing.

 

4.

Bent blade mandrel.

4.

Replace blade mandrel.

 

5.

Clogged mower deck vent holes from buildup of

5.

Clean around mandrels to open vent holes.

 

 

grass, leaves, and trash around mandrels.

 

 

 

 

 

 

 

Mower blades will not

1.

Obstruction in clutch mechanism.

1.

Remove obstruction.

rotate

2.

Worn/damaged mower drive belt.

2.

Replace mower drive belt.

 

3.

Frozen idler pulley.

3.

Replace idler pulley.

 

4.

Frozen blade mandrel.

4.

Replace blade mandrel.

 

 

 

 

 

Poor grass discharge

1.

Engine speed too slow.

1.

Place throttle control in “FAST” position.

 

2.

Travel speed too fast.

2.

Shift to slower speed.

 

3.

Wet grass.

3.

Allow grass to dry before mowing.

 

4.

Mower deck not level.

4.

Level mower deck.

 

5.

Low/uneven tire air pressure.

5.

Check tires for proper air pressure.

 

6.

Worn, bent or loose blade.

6.

Replace/sharpen blade. Tighten blade bolt.

 

7.

Buildup of grass, leaves and trash under mower.

7.

Clean underside of mower housing.

 

8.

Mower drive belt worn.

8.

Replace mower drive belt.

 

9.

Blades improperly installed.

9.

Reinstall blades sharp edge down.

 

10.

Improper blades used.

10.

Replace with blades listed in this manual.

 

11.

Clogged mower deck vent holes from buildup of

11.

Clean around mandrels to open vent holes.

 

 

grass, leaves, and trash around mandrels.

 

 

 

 

 

 

 

Headlight(s) not working

1.

Switch is “OFF”.

1.

Turn switch “ON”.

(if so equipped)

2.

Bulb(s) burned out.

2.

Replace bulb(s).

 

3.

Faulty light switch.

3.

Check/replace light switch.

 

4.

Loose or damaged wiring.

4.

Check wiring and connections.

 

5.

Blown fuse.

5.

Replace fuse.

 

 

 

 

 

Battery will not charge

1.

Bad battery cell(s).

1.

Replace battery.

 

2.

Poor cable connections.

2.

Check/clean all connections.

 

3.

Faulty regulator (if so equipped).

3.

Replace regulator.

 

4.

Faulty alternator.

4.

Replace alternator.

 

 

 

 

 

Loss of drive

1.

Freewheel control in “disengaged” position.

1.

Place freewheel control in “engaged” position.

 

2.

Motion drive belt worn, damaged, or broken.

2.

Replace motion drive belt.

 

3.

Air trapped in transmission during shipment

3.

Purge transmission.

 

 

or servicing.

 

 

 

 

 

 

 

Engine “backfires”

1.

Engine throttle control not set at “SLOW”

1.

Move throttle control to “SLOW” position and allow

when turning engine

 

position for 30 seconds before stopping engine.

 

to idle for 30 seconds before stopping engine.

“OFF”

 

 

 

 

 

 

 

 

 

27

Page 26 Page 28
Page 27
Image 27
Weed Eater 178277 owner manual Off
Page 26 Page 28

178277 specifications

The Weed Eater 178277 is a versatile and efficient tool designed for homeowners and gardening enthusiasts who seek a reliable solution for maintaining their lawns and gardens. This string trimmer stands out for its combination of powerful performance, user-friendly design, and modern technologies that enhance its functionality.

One of the key features of the Weed Eater 178277 is its robust engine that facilitates easy starting and powerful cutting performance. The engine is engineered to provide enough torque to handle various types of vegetation, whether it’s delicate grass or tougher weeds. Additionally, the machine operates efficiently, which helps in conserving fuel and minimizing emissions, making it an eco-friendly choice.

The trimmer incorporates a 17-inch cutting width, allowing users to cover more ground with each pass. This feature significantly reduces the time and effort spent on lawn maintenance, making it an ideal choice for larger yards. The adjustable handle also enhances comfort and control during operation, enabling users to tackle different cutting angles and heights with ease.

Equipped with an automatic line advancement system, the Weed Eater 178277 ensures that the cutting line feeds smoothly as it wears down. This feature eliminates the need for manual adjustments, saving time and providing a hassle-free experience. The trimmer uses a dual-line system, which not only enhances cutting performance but also contributes to a cleaner line of cut.

Another notable technology featured in the Weed Eater 178277 is its lightweight design. Weighing in at just over 10 pounds, it is easy to maneuver and transport, making it perfect for prolonged use without causing strain to the user. This is particularly beneficial for those who may not have the physical strength to handle heavier trimmers.

Also, maintaining the Weed Eater 178277 is straightforward, thanks to its simplified maintenance access points. Users can quickly check and replace parts if necessary, ensuring the longevity of the trimmer.

In summary, the Weed Eater 178277 combines performance, convenience, and durability into a powerful package that appeals to both casual gardeners and serious lawn care enthusiasts. With its blend of innovative features and user-centric design, it is a reliable companion for keeping lawns looking pristine.
Top Page Image Contents