Model NO. WET6500A | Weed Eater 186100 instruction

OWNER'S MANUAL

MODEL NO. WET6500A

6.5HP 17 Inch Tiller

•Assembly

• Operation

• Maintenance

• Service and Adjustments

• Storage

• Troubleshooting

• Repair Parts

For Parts and Service, contact our authorized distributor: call 1-800-849-1297

For Technical Assistance: call 1-800-829-5886

®

01029-weedeater

186100 Rev. 3 06.17.03 TR PRINTED IN U.S.A.

Image 1

Weed Eater 186100 owner manual Model NO. WET6500A

Contents

Model NO. WET6500A Maintenance and Storage Safety RulesTraining Preparation Table of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4, Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire Pressure Operation Meets Ansi Safety RequirementsKnow Your Tiller Tine Operation with Wheel Drive HOW to USE Your TillerFORWARD- Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES Stopped Turning Before Starting EngineTo Transport ADD Gasoline Tilling Hints To Start Engine See Fig Adjust Wheels for Cultivating See Figs Tine Shear PinsCultivating Maintenance Schedule MaintenanceGeneral Recommendations AIR Filter See Fig Engine Cooling System See Fig CleaningMuffler Spark Plug To Adjust Handle Height See Fig Service and AdjustmentsTiller Tire Care Tine Replacement See Figs , 25 To Remove Belt Guard See Fig Ground Drive Belt Adjustment See FigTo Replace Ground Drive Belt See Figs To Adjust Carburetor To Adjust Throttle Control Cable See Fig Other StorageFuel System Engine OIL Troubleshooting Points Tiller - Model Number WET6500A Handle Assembly KEY Part NO. NO. Description MAINFRAME, Left Side MAINFRAME, Right Side Transmission1.95b Tine Shield Tine Assembly Decals Limited Warranty