STo reduce noise levels, limit the number of

pieces of equipment used at any one time. S To reduce noise levels, operate power blowers at the lowest possible throttle

speed to do the job.

SUse rakes and brooms to loosen debris be- fore blowing.

S In dusty conditions, slightly dampen sur- faces or use a mister attachment when wa- ter is available.

S Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

SWatch out for children, pets, open windows, or freshly washed cars. Blow debris away safely.

SUse the full blower nozzle extension so the air stream can work close to the ground.

S After using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

WARNING: Remove fuel cap slowly when refueling.

This engine is certified to operate on unleaded gasoline. Gasoline must be mixed with a good quality synthetic 2--cycle air--cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand synthetic oil is recommended. (A 40:1 ratio is obtained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules under HANDLE FUEL WITH CAUTION.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season.

TO STOP THE ENGINE

DTo stop the engine, move the throttle lever to the STOP position.

BEFORE STARTING THE ENGINE

D Fuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

D Hold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

STARTING POSITION

Blower

Vacuum

WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area when starting engine or while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through the discharge opening, damaging the unit or property, or causing serious injury to by- standers or the operator.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

S Move throttle lever to the position.

S Move choke lever to the FULL CHOKE position.

SSlowly press the primer button 8 times.

Throttle Lever Primer Button

Choke Lever

S Pull starter rope sharply until engine at- tempts to run, but no more than 5 pulls (be- low 30_ F, 8 pulls).

NOTE: If engine attempts to start before the 5th pull, go to next step immediately.

SMove the choke lever to the HALF CHOKE

position.

SPull the starter rope sharply until the engine runs, but no more than 5 pulls (below 30_ F, 10 pulls). Run engine for 5 seconds, then move choke lever to the RUN position.

SAllow the unit to run for 30 more seconds at the RUN position before moving the throttle

lever to position.

If engine has not started after 5 pulls (at HALF CHOKE), repeat STARTING A COLD ENGINE procedure. If engine still does not start, proceed to STARTING A FLOODED ENGINE.

STARTING A WARM ENGINE

S Move throttle lever to the position.

SPull starter rope sharply until engine runs, but no more than 5 pulls.

-- 5 --

Page 4 Page 6
Page 5
Image 5
Weed Eater 530086692 To Stop the Engine, Before Starting the Engine, Starting a Warm Engine, Blower Vacuum
Page 4 Page 6

530086692 specifications

The Weed Eater 530086692 is a standout model in the realm of outdoor power equipment, specifically designed for homeowners and gardening enthusiasts who crave both efficiency and versatility in their landscaping tools. This product embodies innovation and practicality, making the daunting task of yard care manageable and even enjoyable.

One of the standout features of the Weed Eater 530086692 is its powerful engine. The tool is equipped with a reliable and robust power source that allows it to tackle tough vegetation and overgrown areas with ease. The engine’s efficiency not only provides a longer run time but also ensures that users can complete their tasks without frequent interruptions for refueling.

Another notable characteristic of this weed eater is its lightweight design. Weighing in at just a few pounds, it is easily maneuverable, allowing users to navigate tight spaces and difficult terrains without straining their bodies. This feature is particularly beneficial for extended use, reducing user fatigue during long mowing sessions.

The Weed Eater 530086692 also boasts a user-friendly no-tool line replacement system. This technology simplifies the process of changing the cutting line, allowing users to quickly swap out the spool when necessary. This convenience is especially important for maintaining productivity, as it minimizes downtime during yard work.

Additionally, this model features an innovative 2-in-1 head, providing users with the versatility of both trimming and edging capabilities. The ability to switch between functions makes the Weed Eater 530086692 an all-in-one solution for lawn care, ensuring users can achieve a professional-looking finish with minimal effort.

In terms of durability, the Weed Eater 530086692 is built to last. It incorporates high-quality materials in its construction to withstand the rigors of regular use. This durability is complemented by the machine's easy-to-use design, with straightforward controls that make it accessible for users of all skill levels, from novices to seasoned garden warriors.

Safety is also a priority in the design of the Weed Eater 530086692. It includes features such as a protective guard that shields users from debris while maintaining optimal visibility, ensuring a safer mowing experience.

Overall, the Weed Eater 530086692 integrates cutting-edge technology with practical features, making it an indispensable tool for anyone looking to maintain a neat and tidy yard. Whether users need to tackle tough weeds or do some light trimming, this weed eater offers the performance and reliability required to get the job done efficiently. With its combination of power, ease of use, and durability, the Weed Eater 530086692 is a worthwhile investment for maintaining any home landscape.
Top Page Image Contents