S Near objects around which the line can wrap such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 in. (8 cm) Above Ground

SCALPING -- The scalping technique re- moves unwanted vegetationdown to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

7

Air Filter

Screws

Air Filter Cover

Page 6 Page 8
Page 7
Image 7
Weed Eater 530088137 Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts, Clean AIR Filter
Page 6 Page 8

530088137 specifications

The Weed Eater 530088137 is a powerful trimmer that has become a favorite among gardening enthusiasts and professionals alike. This versatile tool is designed to make the challenging task of lawn maintenance easier, more efficient, and enjoyable. Known for its durability and performance, the Weed Eater 530088137 stands out in the competitive landscape of garden equipment.

One of the primary features of the Weed Eater 530088137 is its lightweight design. Weighing in at just a few pounds, this trimmer is easy to handle, reducing fatigue during extended use. The ergonomic handle ensures a comfortable grip, allowing users to maneuver effortlessly around flower beds, trees, and fences while trimming grass and weeds.

The 530088137 is equipped with a powerful motor that delivers ample cutting power without the bulk of traditional gas-powered trimmers. This makes it an ideal choice for homeowners looking for a balance between strength and convenience. This electric trimmer operates quietly, allowing for operation any time of day without disturbing the neighborhood.

Another noteworthy feature is the automatic line advance system. This technology simplifies the process of trimming since users do not have to stop and manually adjust the line. Instead, the trimmer senses when more line is needed and releases it automatically, making the trimming process smoother and less interrupted.

The Weed Eater 530088137 also incorporates a dual-line cutting system, providing an efficient and clean cut every time. The dual-line enables users to tackle thicker vegetation quickly, reducing the time needed for yard work. Additionally, this trimmer has an adjustable cutting width, allowing users to customize their trimming experience based on the specific needs of their lawn.

Moreover, the trimmer features a robust guard that protects both the user and surrounding plants from accidental cuts. Safety is paramount, and this feature helps to ensure that users can operate the trimmer with confidence.

The Weed Eater 530088137 is designed for easy maintenance and durability, with components that withstand the test of time. The trimmer’s body is crafted from high-quality materials, ensuring it can handle regular use without succumbing to wear and tear.

In conclusion, the Weed Eater 530088137 is an outstanding choice for anyone in need of a reliable, easy-to-use, and efficient trimmer. With its combination of lightweight design, powerful motor, automatic line advancement, and torque, it makes yard work less of a chore and gives users the confidence to achieve a well-manicured lawn with minimal effort.
Top Page Image Contents