SAFETY RULES

WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury.

KNOW YOUR UNIT

SRead your instruction manual carefully until you completely understand and can follow all warnings and safety rules before operat- ing the unit.

DRestrict unit to users who understand and will follow all warnings and safety rules in this manual.

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

DUse your unit as a blower for:

D Sweeping debris or grass clippings from driveways, sidewalks, patios, etc.

D Blowing grass clippings, straw, or leaves into piles, around joints, or between bricks.

PLAN AHEAD

DAlways wear eye protection when operating, servicing, or performing maintenance on unit. Wearing eye protection will help to prevent rocks or debris from being blown or ricochet- ing into eyes and face which can result in blindness and/or serious injury. Eye protec-

tion should be marked ANSI Z87.

D Always wear foot protection. Do not go barefoot or wear sandals.

DAlways wear respirator or face mask when working with unit in dusty environments.

DSecure hair above shoulder length. Secure or remove jewelry, loose clothing, or cloth- ing with loosely hanging straps, ties, tas- sels, etc. They can be caught in moving

parts.

DDo not operate unit when you are tired, ill, up- set, or if you are under the influence of alco-

hol, drugs, or medication.

D Keep children, bystanders, and animals away from work area a minimum of 30 feet (10 meters) when starting or operating unit. Do not point blower nozzle in the direction of people or pets.

HANDLE FUEL WITH CAUTION, IT IS HIGHLY FLAMMABLE

DEliminate all sources of sparks or flame (in- cluding smoking, open flames, or work that can cause sparks) in the areas where fuel is

mixed, poured, or stored.

DMix and pour fuel in an outdoor area; store fuel in a cool, dry, well ventilated place; use an approved, marked container for all fuel pur- poses.

DDo not smoke while handling fuel or while operating the unit.

DMake sure the unit is properly assembled and in good operating condition.

DDo not fill fuel tank while engine is running. D Avoid spilling fuel or oil. Wipe up fuel spills be-

fore starting engine.

DMove at least 10 feet (3 meters) away from fuel and fueling site before starting engine.

D Always store gasoline in a container ap- proved for flammable liquids.

OPERATE YOUR UNIT SAFELY

D Inspect unit before each use for worn, loose, missing, or damaged parts. Do not use until unit is in proper working order.

D Keep outside surfaces free from oil and fuel.

DNever start or run engine inside a closed room, building or other unventilated area.

Breathing exhaust fumes can kill.

D To avoid static electricity shock, do not wear rubber gloves or any other insulated gloves while operating unit.

D Do not set unit on any surface except a clean, hard area while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through discharge opening, damaging unit, property, or causing serious injury to bystanders or operator.

DAvoid dangerous environments. Do not use in unventilated areas or where explosive vapors or carbon monoxide build up could

be present.

DDo not overreach or use from unstable sur- faces such as ladders, trees, steep slopes,

rooftops, etc. Keep firm footing and balance at all times.

D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

DNever run unit without the proper equip- ment attached. When using your unit as a

blower, always install blower tube.

DCheck air intake opening and blower tube frequently, always with engine stopped and spark plug disconnected. Keep vents and discharge tubes free from debris

which can accumulate and restrict proper air flow and cause damage to the unit.

DNever use for spreading chemicals, fertil-

izers, or other substances which may contain toxic materials.

DTo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue

pits, ashtrays, etc.

DUse only for jobs explained in this manual.

MAINTAIN YOUR UNIT PROPERLY

DHave all maintenance other than the rec- ommended procedures described in the in- struction manual performed by an autho-

rized service dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

DUse only recommended Weed EaterŽparts; use of any other parts may void your war-

ranty and cause damage to your unit.

DEmpty the fuel tank before storing the unit. Use up fuel left in carburetor by starting the engine and letting it run until it stops.

-- 2 --

Page 2
Image 2
Weed Eater 530163349 instruction manual Safety Rules

530163349 specifications

The Weed Eater 530163349 is a highly regarded string trimmer designed for homeowners and landscaping professionals seeking a reliable and efficient tool for maintaining lawns and gardens. This model features a robust design and a range of specifications aimed at simplifying lawn care tasks.

One of the stand-out features of the Weed Eater 530163349 is its powerful engine. The trimmer is equipped with a reliable two-cycle engine that provides sufficient power for tackling thick grass and weeds. This ensures that users can face even the most challenging overgrowth with confidence. Its efficient fuel consumption also means less downtime for refueling, allowing users to get more done in less time.

The trimmer utilizes an innovative bump feed cutting system. This technology allows users to easily extend the cutting line by simply tapping the trimmer head on the ground while in operation. This feature not only enhances productivity but also minimizes interruptions during work, providing a seamless trimming experience.

In terms of ergonomics, the Weed Eater 530163349 features an adjustable handle that ensures comfortable operation for users of differing heights. Its lightweight construction reduces user fatigue during extended periods of use, allowing homeowners to tackle larger lawn areas without strain.

Furthermore, the trimmer is designed for easy maintenance. The engine features an easy-access air filter and spark plug, which simplifies regular upkeep and prolongs the life of the equipment. Its durable materials are built to withstand the rigors of outdoor use, making it a cost-effective investment for long-term lawn care.

The Weed Eater 530163349 also emphasizes user safety. It is equipped with a protective guard that helps shield the operator from debris and projectiles while trimming. This aspect of design is crucial for anyone using a trimmer in dense or overgrown areas.

In summary, the Weed Eater 530163349 is a top-tier string trimmer that seamlessly combines power and efficiency with user-friendly features. Its powerful engine, innovative bump feed system, ergonomic design, easy maintenance, and safety features make it an excellent choice for both novice and experienced users alike. Whether you are maintaining a small backyard or a larger landscape, this string trimmer meets all the demands of modern lawn care.