SUse the full blower nozzle extension so the air stream can work close to the ground.

SAfter using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or boat oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

NOTE: Unit must be placed on its side when adding fuel (see illustration below).

TO STOP THE ENGINE

DTo stop the engine, move the throttle lever to the STOP position.

BEFORE STARTING THE ENGINE

WARNING: You MUST make sure the tubes are secure before using the unit.

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DHold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects.

STARTING POSITION

WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area when starting engine or while engine is running. Debris such as gravel, sand, dust, grass, etc. could be picked up by the air intake and thrown out through the discharge opening, damaging the unit or property, or causing serious injury to by- standers or the operator.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE

1.Move throttle lever to the position.

2.Move choke lever to the FULL CHOKE position.

3.Slowly press the primer button 8 times.

-- 6 --

Page 5 Page 7
Page 6
Image 6
Weed Eater 545137221 Before Starting Engine Fueling Engine, To Stop the Engine, Before Starting the Engine
Page 5 Page 7

545137221 specifications

The Weed Eater 545137221 is a powerful and efficient string trimmer designed for both residential and commercial use. This versatile trimmer makes it easy to maintain a well-manicured lawn, tackle overgrown vegetation, and achieve a polished garden bed. Equipped with a host of advanced features and technologies, the 545137221 makes weed elimination a manageable and efficient task.

One of the standout features of the Weed Eater 545137221 is its lightweight design, which allows for easy maneuverability without sacrificing durability. Weighing in at just under 8 pounds, this trimmer can be handled comfortably, reducing fatigue during extended use. The ergonomic handle design enhances user comfort, allowing for better grip and control during operation.

The 545137221 model boasts a robust 25cc two-cycle engine that delivers reliable power for cutting through dense weeds and thick grass. The engine’s high-performance capabilities ensure that users can tackle tough jobs without the worry of stalling or bogging down, making it an ideal choice for professionals and homeowners alike. The engine is also equipped with an efficient fuel system that maximizes runtime while minimizing emissions, adhering to environmental standards.

Another impressive feature is the automatic line feed system, which allows for continuous operation without the need for manual adjustments. This system automatically releases more line as needed, ensuring that users can focus on trimming without interruptions. The trimmer comes with a dual-line cutting head, which provides superior cutting efficiency, significantly improving productivity and trimming precision.

The Weed Eater 545137221 also includes a variety of customizable settings. Users can easily adjust the cutting height, allowing for tailored results depending on the type of vegetation being trimmed. The ability to switch between different cutting modes ensures that the tool can adapt to various tasks, from edging to heavy-duty trimming.

In summary, the Weed Eater 545137221 combines lightweight design, a powerful engine, and user-friendly features to create an exceptional string trimmer. With its efficient automatic line feed, customizable cutting options, and environmentally friendly performance, this model is an excellent choice for anyone looking to tackle garden maintenance tasks with ease and efficiency. Whether it’s for personal use or professional landscaping, the Weed Eater 545137221 delivers on performance and reliability, making yard work faster and more efficient.
Top Page Image Contents