8. Insert the line into the exit hole in the hub | Line in Notch |
as shown in the illustration. |
|
9. Align the notch with the line exit hole.
10.Push the spool into the hub until it snaps into place.
11.Pull on the line extending outside the hub to release it from the notch; otherwise, the
unit will not function properly.
Hub | Line exit hole | |
Small | ||
| ||
Hole |
| |
Spool |
| |
Tap |
| |
Button |
|
USER REPLACEABLE SERVICE PARTS
REPLACEMENT PART | PART NUMBER |
Spool with 0.065″ Trimmer Line | 952701663 |
Assist Handle | 530403805 |
Bolt Carriage, | 530403886 |
Wing Nut | 530016152 |
Shield Assembly | 530404076 |
Edge Guide | 530403845 |
STORAGE
WARNING: Perform the following steps after each use.
S Stop the unit and disconnect the power source when not in use.
SCarry the unit with motor stopped.
SStore the unit so the line limiter blade can- not cause injury.
SStore unit and extension cord indoors in a high, dry place out of the reach of children.
Store unit unplugged.
SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.
8