Blower Assembly, Vacuum Assembly | Weed Eater 545117525 manual

ASSEMBLY

WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover or attempting to in- sert or remove the inlet restrictor, blower tube, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

WARNING: If received assembled, ensure your unit is properly assembled and all fasteners are secure.

SA standard screwdriver is required for as- sembly.

BLOWER ASSEMBLY

NOTE: Assembly instructions for using your unit as a vacuum follow this section.

Attaching the blower tube

If you have already assembled your unit for use as a vacuum, refer to the section

HOW TO CONVERT UNIT FROM VACUUM USE TO BLOWER USE.

To attach blower tube:

1.Align the grooves on the blower tube with the grooves on the blower outlet.

2.Push the blower tube onto the blower outlet until it snaps into place (tube is secured by red tube release button).

3.To remove the blower tube, press the tube release button while pulling on tube.

Tube Release Button

Blower Tube

Blower outlet

VACUUM ASSEMBLY

NOTE: Assembly instructions for using your unit as a blower are explained in the previous section.

If you have already assembled your unit for use as a blower, remove the blower tube.

Remove the inlet restrictor

An inlet restrictor is used when using your unit as a blower. This restrictor is not used during vacuum use and must be removed during assembly for vacuum use.

NOTE: Be sure to keep the inlet re- strictor for using your unit as a blower.

1.Ensure unit is stopped and extension cord is unplugged.

2.Open the inlet cover by inserting the tip of a screwdriver into the latch area on the blower unit. Gently tilt handle

of screwdriver toward the front of the unit to release the latch while pulling up on the vacuum inlet cover with your other hand.

Bottom view	Latch Area
of unit
Vacuum Inlet Cover (closed)
Impeller	Latch Area
	Latch Area

Vacuum Inlet Cover (opened)

3.Turn the inlet restrictor counterclock- wise and remove it from the unit. Do not close the inlet door. You will next attach the vacuum tubes.

Vacuum

Inlet Cover

Inlet

Restrictor

Attaching the vacuum tubes

There are 2 vacuum tubes, an upper tube and a lower tube. The upper tube has a vacuum assist handle attached to one end and is cut straight on both ends. The upper tube attaches to the blower unit. The lower tube has an angled end that you point toward the ground during vacuum use. The lower tube attaches to the upper tube.

1.Ensure unit is stopped and exten- sion cord is unplugged.

2.While holding inlet cover open, place the hooks of the vacuum assist handle on the retaining posts of the unit.

3.Raise the tube until it is secured to the blower unit by the red inlet cover latch.

Upper Vacuum Tube Vacuum Assist Handle

Hook

Retaining Post

545117525, EBV 215 specifications

The Weed Eater EBV 215, model number 545117525, stands out in the market of outdoor power equipment, specifically designed to deliver robust performance for lawn care enthusiasts and professionals alike. This lightweight yet powerful leaf blower combines ergonomics with cutting-edge technology, making yard maintenance more efficient and comfortable.

One of the key features of the EBV 215 is its 25cc two-stroke engine. This engine provides ample power to tackle a variety of debris, from leaves to small twigs, making it an essential tool for keeping your garden tidy. The engine's design not only enhances performance but also reduces fuel consumption, allowing users to complete their tasks without frequent refueling, thereby saving time and money.

The EBV 215 incorporates an easy start system, simplifying the ignition process. The user's experience is further enhanced by the adjustable throttle, allowing operators to customize power output based on the specific task at hand. Whether clearing a driveway or preparing garden beds, this blower offers versatility that caters to various landscaping needs.

An ergonomic design is critical for users who may spend extended periods operating this equipment. The EBV 215 features a lightweight construction, reducing user fatigue and promoting comfort during prolonged use. Coupled with its cushioned grip, this model ensures that maneuverability is not compromised, making it easier to reach all corners of the yard.

Another noteworthy feature is its variable speed control, giving users the ability to adjust the airflow seamlessly. This flexibility is essential for effectively removing debris without damaging delicate plants or surfaces. The fan design maximizes air volume while minimizing noise, creating a more pleasant experience for both the user and the surrounding environment.

Maintenance is straightforward with the EBV 215 thanks to its easy access to the air filter and spark plug. Regular maintenance ensures optimal performance and longevity, making this model a smart investment for anyone serious about lawn care.

In conclusion, the Weed Eater EBV 215, with its powerful engine, ergonomic design, and user-friendly features, is an ideal choice for those looking to efficiently manage yard work. Its balance of power and comfort makes it a preferred tool for both amateur gardeners and professional landscapers alike. Reliable and effective, the EBV 215 ensures that your outdoor spaces remain pristine and well-maintained throughout the seasons.

Weed Eater 545117525 Standard screwdriver is required for as- sembly, Blower Assembly

Models: 545117525 EBV 215