Shield
Wing Nut
Bracket
Slot
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
| Locking Sleeve |
| Assembly |
| Shaft |
Trimmer |
|
Head |
|
| Shield |
| Spark Plug |
Line Limiter | STOP Switch |
Blade | |
| Starter |
| Handle |
Assist Handle | Muffler |
Throttle Trigger
Primer Bulb
Choke
Lever
Fuel Mix
Fill Cap
STOP SWITCH
The STOP switch is used to stop the engine. To stop the engine, push and hold the switch in the STOP position until the engine stops.
PRIMER BULB
The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.
CHOKE
The CHOKE helps to supply fuel to the engine to aid in cold starting. Activate the choke by moving the choke lever to the FULL CHOKE position. After the engine attempts to start, move the choke lever to the HALF CHOKE position. Once engine has started, move the choke lever to the RUN position.
6
