STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVERTRACTORWHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Page 24
Image 24
Weed Eater HD13538 manual Storage, Other, Fuel System, Engine OIL, Cylinders

HD13538 specifications

The Weed Eater HD13538 is a robust and reliable string trimmer designed for efficient lawn care and maintenance. With its impressive features and advanced technologies, this power tool stands out among its competitors, making it an essential item for homeowners and gardening enthusiasts alike.

One of the key features of the HD13538 is its powerful 38cc engine. This engine provides ample power to tackle thick weeds, grass, and underbrush with ease. The robust performance of this trimmer makes it suitable for both small and larger yards, ensuring that users can achieve a well-manicured appearance for their outdoor spaces without the hassle of underpowered equipment.

The weed eater also boasts a lightweight design, weighing in at just around 10 pounds. This is particularly advantageous for extended use, as it minimizes fatigue and allows users to maneuver the trimmer easily. The ergonomically designed handle adds to the overall comfort, making it user-friendly while providing optimal control during operation.

A standout feature of the Weed Eater HD13538 is its innovative 2-in-1 capability, which allows users to easily switch between trimming and edging tasks. The adjustable shaft length offers additional convenience, accommodating users of various heights and ensuring that every job can be completed with precision.

Equipped with a bump feed mechanism, the HD13538 allows for quick line advancement, ensuring that users can keep working without interruptions. Simply tap the trimmer head on the ground, and the line automatically feeds out, providing continuous cutting power and saving time during yard work.

The weed trimmer also features a durable construction designed for longevity. Additionally, the trimmer head is designed to accept various line thicknesses, giving users the flexibility to choose the best option for their specific lawn care needs.

In terms of maintenance, the Weed Eater HD13538 is straightforward. Its simple start system reduces the frustration often associated with starting gas-powered equipment, while the accessible air filter and spark plug make periodic maintenance tasks a breeze.

Overall, the Weed Eater HD13538 offers a well-rounded combination of power, ease of use, and durability. Its advanced features and technologies cater to the needs of both casual gardeners and diligent landscapers, making it a top choice for anyone looking to maintain a tidy outdoor space.