Starting a Flooded Engine, Clean AIR Filter

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

SMove the choke lever to the RUN position. S Move throttle lever to the position.

S Pull rope to clear engine of excess fuel. This could require pulling the starter rope many times.

If unit still doesn’t start, call 1-800-554-6723.

WARNING: Avoid touching muffler

CLEAN AIR FILTER

Air Filter

Cover

unless engine and muffler are cold. A hot muffler can cause serious burns.

Air Filter

Screws

WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tubes. The rotating blades can cause serious injury. Always disconnect the spark plug before performing maintenance or ac- cessing movable parts.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instruct-ed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws S Muffler

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S Fuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

S Vacuum Bag -- Do not use vacuum bag if it is torn or damaged.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

S Wipe off unit with a clean dry cloth.

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

SClean the cover and the area around it to keep debris from falling into the carburetor

chamber when the cover is removed.

SRemove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

SWash the filter in soap and water. S Allow filter to dry.

S Apply a few drops of oil to the filter; squeeze filter to distribute oil.

S Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

S Twist, then pull off spark plug boot.

S Remove spark plug from cylinder and dis- card.

S Replace with Champion RCJ-8Y spark plug and tighten with a 3/4 in. socket wrench (15 - 20 ft/lbs).

S Reinstall the spark plug boot.

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

-- 6 --

530088944, LE Series specifications

The Weed Eater 530088944 LE Series is a well-regarded tool among homeowners and landscaping professionals. This electric string trimmer is designed to provide users with an efficient and powerful solution for maintaining lawns, gardens, and yards. With a focus on ease of use, cutting performance, and ergonomic design, the LE Series has gained popularity for its reliability and performance.

One of the standout features of the Weed Eater LE Series is its lightweight design, which makes maneuvering the trimmer effortless. Weighing in at just a few pounds, it reduces user fatigue during prolonged use, making it suitable for both small and large trimming jobs. The adjustable handle allows users to customize the trimmer's grip, providing added comfort and control.

Equipped with a powerful electric motor, the Weed Eater 530088944 offers strong cutting performance with minimal noise. This is particularly advantageous for residential areas where noise restrictions might be in place. The electric motor is designed to be energy-efficient, making it an eco-friendly option compared to gas-powered alternatives. This efficiency also minimizes maintenance requirements since there is no need for oil changes or fuel mixing.

The LE Series features a dual-line feeding system, allowing for a wider cutting path to tackle even the toughest overgrowth. The easy-load spool simplifies line replacement, ensuring that users can quickly get back to their trimming tasks without frustration. The trimmer head rotates easily, making it convenient for users to switch between trimming and edging tasks with minimal effort.

Another notable characteristic of the 530088944 LE Series is its safety features. It includes a protective shield that deflects debris away from the user, increasing safety during operation. The safety switch prevents accidental starts, providing peace of mind, especially for novice users.

Furthermore, the Weed Eater LE Series is designed with durability in mind. Constructed with high-quality materials, it can withstand the rigors of regular use in various environments. Its compact and efficient design also makes it easy to store, a bonus for users with limited space.

In conclusion, the Weed Eater 530088944 LE Series stands out as an exceptional choice for those seeking a reliable and easy-to-use electric string trimmer. With its lightweight build, powerful electric motor, efficient cutting system, and safety features, it offers a perfect blend of performance and convenience. Whether you’re a homeowner or a professional landscaper, this trimmer is sure to meet your trimming needs effectively.

Weed Eater LE Series Starting a Flooded Engine, Clean AIR Filter, General Recommendations

Models: 530088944 LE Series