SERVICE AND ADJUSTMENTS

 

 

• Remove belt downward from around engine pulley.

R.H. SUSPENSION ARM

 

• Pull belt slack toward rear of tractor. Remove belt

 

upwards from transaxle pulley by deflecting belt keep-

 

 

ers.

MANDREL

ENGINE

• Remove belt from center span keeper and pull belt away

PULLEY

PULLEY

from tractor.

 

 

BELT INSTALLATION -

 

IDLER

• Carefully work new belt down between transaxle belt

 

keepers and onto the input pulley.

RETAINER

PULLEYS

SPRING

 

• Slide belt into the center span keeper.

 

 

• Pull belt toward front of tractor and roll around the top

 

 

groove of engine pulley.

 

 

• Install belt through stationary idler and clutching idler.

MANDREL

 

• Make sure belt is in all pulley grooves and inside all belt

PULLEY

 

guides and keepers.

FIG. 20

 

• Install mower (See “TO INSTALL MOWER” in this

 

section of manual).

 

 

TO ADJUST BRAKE (See Fig. 21)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

ENGINE

PULLEY

CLUTCHING

IDLER

CENTER SPAN KEEPER

STATIONARY IDLER

TRANSAXLE PULLEY

WITH PARKING BRAKE "ENGAGED"

1-1/2"

NUT "A"

JAM NUT

OPERATING

ARM

FIG. 21

FIG. 22

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe- in or camber, contact your nearest authorized service center/department.

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

Park the tractor on level surface. Engage parking brake. For

• Block up axle securely.

• Remove axle cover, retaining ring and washers to allow

assistance, there is a belt installation guide decal on bottom

wheel removal (rear wheel contains a square key - Do not

side of left footrest.

lose).

BELT REMOVAL -

• Repair tire and reassemble.

• Remove mower (See “TO REMOVE MOWER” in this

• On rear wheels only: align grooves in rear wheel hub and

section of manual).

axle. Insert square key.

NOTE: Observe entire motion drive belt and position of all

• Replace washers and snap retaining ring securely in axle

belt guides and keepers.

groove.

• Remove belt from stationary idler and clutching idler.

21 • Replace axle cover.

Page 21
Image 21
Weed Eater WE1538B manual To Adjust Brake See Fig, To Adjust Steering Wheel Alignment, Front Wheel TOE-IN/CAMBER

WE1538B specifications

The Weed Eater WE1538B is a versatile and reliable string trimmer designed for both residential and commercial gardening needs. This gas-powered tool combines power, efficiency, and ease of use, making it an excellent choice for homeowners and landscaping professionals alike. Engineered for optimal performance, the WE1538B features a robust 38cc engine, providing enough power to tackle tough weeds and thick grass with remarkable efficiency.

One of the standout features of this trimmer is its lightweight design, which significantly enhances maneuverability. Weighing in at just 12 pounds, the WE1538B allows users to operate it for extended periods without experiencing fatigue. The well-balanced construction ensures that users can easily handle the trimmer in hard-to-reach areas, making it an ideal tool for edging along fences or flower beds.

The WE1538B also incorporates a user-friendly starting system, which includes a manual choke to manage fuel flow, making starting the engine a straightforward process. This is particularly beneficial for novice users who may find traditional starting methods challenging. Additionally, the trimmer comes with an adjustable throttle control, allowing users to regulate engine speed according to their trimming needs.

Another notable aspect of the Weed Eater WE1538B is its dual-line cutting head. The trimmer is designed to accommodate various line sizes and types, depending on user preferences and the nature of the tasks at hand. The dual-line system helps increase cutting efficiency, allowing for a wider path and quicker trimming, reducing the amount of time spent on yard maintenance.

Moreover, the WE1538B utilizes an innovative anti-vibration technology. This feature minimizes vibrations transmitted to the user's hands, helping to reduce fatigue and discomfort during prolonged use. This technology significantly enhances user experience by allowing for longer operating times while maintaining comfort and control.

With its durable construction and essential features, the Weed Eater WE1538B is an excellent investment for anyone looking to achieve a well-maintained yard. Its combination of power, lightweight design, and user-friendly features makes it a standout choice in the string trimmer market. Whether you are battling overgrown areas or maintaining regular landscaping, the WE1538B's performance and reliability will help you achieve professional-looking results with ease.