1.Lift seat for bolt access.

2.Disconnect BLACK battery cable then RED battery cable.

3.Remove battery bracket bolt.

4.Install new battery with terminals facing to the right, and away from seat as shown.

5.Reinstall battery bracket and bolt.

6.First connect RED battery cable to posi- tive (+) battery terminal.

7.Connect BLACK grounding cable to negative (-) battery terminal.

Fender

Battery

Battery

Bracket

ENGINE

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your riding mower to a qualified service center for repair and/or adjustment.

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your riding mower to a qualified service center for repair and/or adjustment.

IMPORTANT: Never tamper with the engine governor, which is factory set for proper en- gine speed. Overspeeding the engine above the factory high speed setting can be danger- ous. If you think the engine-governed high speed needs adjusting, contact a qualified service center, which has proper equipment and experience to make any necessary adjustments.

PARTES NO ENSAMBLADAS

 

 ª!RANDELAªPLANAªGRANDE

 

)NSERTOªDELªVOLANTE

 

 

 

 

6OLANTE

 ª#ONTRATUERCAª

 

 

 

 

 ª0ASADOR

 

 

 

 

 ª!RANDELAªPLANAª

 ª#ONTRATUERCAª

#UBIERTAªDELª

 

 

 

EJEªDEªDIRECCIØN

 

!DAPTADORªDELªVOLANTE

 ª0ERNOªHEXAGONALª

%JEªDEª

#UBIERTAªDEªDIRECCIØN

DIRECCIØN

 

ªXªª

 

 

 

 

 

 

 ª!RANDELA

 

 

 

 

 ª,LAVE

(OJAªDEªINCLINACIØN

!SIENTO

 ª0ERILLA

 

 

 

 

 

 

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your riding mower to run poorly, stop running, or prevent it from starting.

Check wiring. Make sure all wiring and connectors are secure.

TO REPLACE FUSE

Replace with 4 amp. or 5 amp. automotive type plug-in fuse. The fuse holder is located

ENSAMBLADO/PREOPERACIÓN

Su nueva cortadora de césped se ha ensamblado en la fábrica con excepción de aquellas partes que se dejan sin ensamblar para el envío. Para asegurar la operación segura y correcta de la corta- dora de césped, todas las partes y la ferretería que usted ensamble se deben apretar bien. Use las herramientas correctas necesarias para asegurar un ajuste apropiado.

under the fender.

HERRAMIENTAS NECESARIAS PARA EL ENSAMBLADO

El ensamblado será más simple si cuenta con un conjunto de llaves de cubo. Los tamaños de llave estándar que necesita se indican en seguida.

(1)Llave de 3/4"

(1)Llave de 1/2"

(1)Herramienta de cuchilla

(1)calibrador de presión para llantas

Cuando se menciona la derecha o la izquierda en este manual, esto significa cuando usted se encuentra en la posición de operación (sentado al volante).

RETIRO DE LA CORTADORA DE CÉSPED DE LA CAJA DE CARTÓN

DESEMPACADO DE LA CAJA DE CARTÓN

1.Corte las líneas punteadas de los cuatro paneles de la caja de cartón. Retire la caja de cartón y el marco superior como una sola pieza.

2.Retire los materiales de empaque de la corta- dora de césped.

NOTA: Sólo corte la caja de cartón con una herramienta de cuchilla corta, pues una de cuchilla larga o una sierra pueden pinchar las llantas de la unidad.

22

31

Page 22
Image 22
Weed Eater WE261 warranty Partes no Ensambladas, Engine, Interlocks and Relays, To Replace Fuse

WE261 specifications

The Weed Eater WE261 is a robust and versatile string trimmer designed to tackle a variety of lawn care tasks with ease and efficiency. Aimed at both homeowners and landscaping professionals, the WE261 is built to handle the challenges of overgrown lawns and garden beds, providing powerful performance and reliability.

One of the standout features of the WE261 is its 26cc 2-cycle engine, which delivers ample power while maintaining a lightweight profile. This engine ensures that users can navigate through dense vegetation and thick weeds without compromising performance. The 2-cycle technology allows for efficient fuel usage, providing users with longer run times between refuels.

The WE261 is equipped with a dual line bump head, which automatically releases more line as needed. This feature enhances productivity by allowing the user to focus on trimming rather than manually adjusting the string. The .095-inch line diameter provides a thick cutting path, making it effective against stubborn weeds and tall grass.

Another significant characteristic of the WE261 is its ergonomic design. The trimmer features a padded hand grip and an adjustable handle, allowing users to customize their grip for maximum comfort and control. This is especially beneficial during extended use, as it minimizes fatigue and enhances maneuverability.

The trimmer also incorporates an easy-start technology, which simplifies the starting process. Users can enjoy quick and hassle-free starts with minimal effort required. This feature is particularly useful for those who may not have extensive experience with starting gas-powered equipment.

Durability is a key consideration in the design of the WE261. Constructed with high-quality materials, this weed eater is built to withstand the rigors of regular use. The robust build ensures that it can handle various outdoor conditions, making it a reliable option for any lawn care enthusiast.

In summary, the Weed Eater WE261 presents a combination of power, efficiency, and user-friendly features. With its strong 26cc engine, automatic dual line bump head, ergonomic design, and easy-start technology, it stands out as an exceptional choice for anyone looking to maintain a well-groomed lawn. Whether dealing with overgrown areas or simply keeping the yard tidy, the WE261 is up to the task, delivering performance that users can trust.