WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Air Filter

Screws

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by your authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

7

Page 6 Page 8
Page 7
Image 7
Weed Eater FX25 LE Check for Loose Fasteners and Parts, Check for Damaged or Worn Parts, Inspect and Clean Unit and Labels
Page 6 Page 8

530163531, FX25 LE, XT250 LE specifications

The Weed Eater XT250 LE, FX25 LE, and model 530163531 are powerful and efficient string trimmers designed for both professional landscapers and homeowners at every level. These trimmers are designed for ease of use, durability, and performance, making them essential tools for maintaining a pristine outdoor space.

One of the main features of these trimmers is their lightweight and ergonomic design. This helps reduce user fatigue during extended periods of operation. The XT250 LE and FX25 LE have contoured handles that provide a comfortable grip, allowing users to easily maneuver the trimmer around gardens, lawns, and hard-to-reach areas. The adjustable speed settings on these models enable operators to switch seamlessly between various tasks, whether they need quick, precision trimming or efficient edging.

Equipped with a high-performance two-cycle engine, the Weed Eater XT250 LE, FX25 LE, and 530163531 deliver impressive power with minimal vibration. This engine is designed for easy starting, which means less time spent wrestling with the equipment and more time mowing down overgrown grass and weeds. The trimmers also feature a bump head line release system, allowing users to quickly extend the cutting line without having to stop and open the trimmer.

In terms of cutting capabilities, these models come with a 17-inch cutting width, which provides ample coverage for trimming large areas. The advanced line technology reduces tangling and ensures a consistent cutting performance. This feature is perfect for tackling thick grass and tough weeds, while the lightweight construction ensures maneuverability.

Another noteworthy characteristic is the fuel-efficient design of the Weed Eater XT250 LE, FX25 LE, and model 530163531. These trimmers maximize fuel usage, leading to longer run times and fewer refuels during operation. The environmentally conscious design reduces emissions, making these trimmers more eco-friendly compared to traditional models.

Overall, the Weed Eater XT250 LE, FX25 LE, and model 530163531 are reliable and versatile string trimmers that cater to a wide range of landscaping needs. With their powerful engines, user-friendly features, and excellent cutting capabilities, they are designed to make lawn care tasks more efficient and enjoyable. Whether you’re edging along driveways or tackling overgrown flower beds, these trimmers stand out as a dependable choice.
Top Page Image Contents