Engine Choke Lever

ON/STOP

Switch

FULL HALF OFF

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Starter Handle

Choke

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lever

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.Once the engine starts, allow it to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at OFF CHOKE before releasing the throttle trig- ger.

NOTE: If engine dies with the choke le- ver in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 5 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to OFF CHOKE.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING INSTRUCTIONS

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Muffler

Heavy Shoes

 

Primer Bulb

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

Cut from your right to your left.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

To stop engine:

SRelease the throttle trigger.

S Push and release the engine ON/STOP switch.

5

Page 4 Page 6
Page 5
Image 5
Weed Eater XT300 HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine, Operating Position
Page 4 Page 6

XT300 specifications

The Weed Eater XT300 is a versatile and powerful string trimmer designed to make yard work more efficient and manageable. With its blend of innovative features and advanced technologies, it stands out as an essential tool for both casual gardeners and professional landscapers alike.

One of the main features of the XT300 is its robust 30cc two-cycle engine, which provides ample power to tackle even the toughest overgrowth. This engine is designed for optimal performance, delivering a smooth and consistent power output that allows you to cut through thick grass and weeds with ease. Additionally, the XT300’s lightweight design makes it easy to maneuver, reducing user fatigue during extended periods of operation.

Another noteworthy characteristic of the XT300 is its Easy Start system. This technology simplifies the starting process, allowing users to get to work quickly without the frustration often associated with recoil starters. With just a few gentle pulls, the engine fires up, making it ideal for users of all experience levels.

The XT300 also features a 17-inch cutting swath, enabling efficient trimming of large areas in a single pass. This wide cutting path reduces the time and effort required to complete your yard maintenance tasks, making it a time-saving asset. The trimmer is equipped with a bump feed head that allows for quick and efficient line advancement, ensuring that you can continue working without the need for constant interruptions.

Durability is another key aspect of the XT300, as its construction includes high-quality materials designed to withstand the rigors of outdoor use. The trimmer’s solid build means that it can handle bumps and scrapes without compromising performance over time. Safety features, including a protective guard, further enhance its usability while providing peace of mind during operation.

Additionally, the ergonomic design of the XT300 includes an adjustable handle that provides comfort and control, enabling users to trim with precision even in hard-to-reach areas. The balance and lightweight nature of the trimmer contribute to its ease of use, making it suitable for users of all physical capabilities.

In summary, the Weed Eater XT300 is a powerful and reliable string trimmer perfect for any landscaping job. With its features like a potent engine, Easy Start technology, a generous cutting swath, and an emphasis on comfort and durability, this tool is built to help you maintain a well-groomed yard with ease and efficiency.
Top Page Image Contents