![](/images/new-backgrounds/1183401/18340113x1.webp)
2.Lift the Weight Rest (9) in the Right Upright (7) and secure it in a raised position with a Weight Rest Knob (23).
Attach the Right Upright (7) to the right Crossbar Extension (5) with four M10 x 80mm Bolts (38), two Joint Plates (18), and four M10 Nylon Locknuts (48). Do not tighten the Locknuts yet.
Repeat this step with the Left Upright (not shown).
3.Attach the Front Leg (2) to the Bench Frame (1) with two M10 x 65mm Bolts (35), two M10 Washers (46), and two M10 Nylon Locknuts (48).
Do not tighten the Locknuts yet.
4.Attach the Bench Frame (1) to the center holes in the Crossbar (4) with two M10 x 75mm Bolts (43) and two M10 Nylon Locknuts (48).
Tighten the M10 Nylon Locknuts (48) used in steps 1–4.
2 |
|
|
| 9 |
|
| 23 |
|
| 7 |
|
|
| 48 |
| 18 | 18 |
|
| 48 |
|
| 5 |
38 | 38 |
|
|
| |
3 |
|
|
|
| 35 |
| 2 |
|
| 46 | 1 |
| 48 |
|
| 46 | 35 |
4 |
|
|
| 4 | Center |
| Holes | |
|
| |
|
| 48 |
| 43 |
|
| 1 |
|
| 43 |
|
7