SEAT ASSEMBLY
26.Attach the Backrest (41) to the Front Upright (42) with two 1/4Ó x 2 1/2Ó Screws (43) and two 1/4Ó Flat Washers (10).
27. Press a 1 1/2Ó Square Inner Cap (32) into the |
Seat Frame (36). |
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the |
center hole in the Seat Plate (37). Attach the |
Seat Plate to the Seat (13) with two 1/4Ó x |
1/2Ó Screws (18). |
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the |
indicated hole in the Seat Frame (36). |
Tighten a 1/4Ó Nylon Locknut (2) with a 1/4Ó |
Flat Washer (10) onto the Carriage Bolt. |
Attach the other end of the Seat (13) to the |
Seat Frame (36) with a 1/4Ó Flat Washer (10) |
and the 1/4Ó x 2Ó Screw (24). |
28. Press a 1 1/2Ó Square Inner Cap (32) into the |
Leg Lever (29). |
Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach |
the Leg Lever (29) to the Seat Frame (36) |
with the 5/16Ó x 2 1/4Ó Bolt and a 5/16Ó Nylon |
Locknut (3). Do not overtighten the Nylon |
26 |
42
41
43 10
27
13
| 38 |
|
| 37 | 32 |
|
| |
|
| 18 |
36 |
|
|
24 | 10 |
|
| 2 | |
|
|
28
36
3
2
Locknut. The Leg Lever must be able to |
pivot freely. |
Insert the 5/16Ó x 2Ó Eyebolt (35) into the Leg |
Lever (29) from the direction shown. Tighten |
a 5/16Ó Nylon Locknut (3) with a 5/16Ó Flat |
Washer (8) onto the Eyebolt. |
LubricateÐ33
35
32
29
8
3
14
