ASSEMBLY
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two persons.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•Make sure all parts are oriented as shown in the drawings.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools (not included) are required for assembly:
• One standard screwdriver
• One Phillips screwdriver
•One Allen wrench (included with the MAX by WEIDER resistance system)
1.
Before beginning assembly, make sure that you have read and understand the informa- tion in the box above.
Attach a Cap (2) to one end of the
Screw (3). Repeat with the other Caps.
2.Locate the Tray (B) on the resistance system. Remove the two indicated Button Head Screws (C) and the Cover Plate (A) from the Tray. Note: The resistance bar assembly is shown removed from the resistance system for clarity.
3.Remove the
1 |
|
2 | 1 |
| 2 |
| 2 |
| 3 |
2 | C |
| |
| A |
| B |
3 |
|
| D |
| A |
| E |
4
