6.Attach the Lat Tower (4) to the Upright (3) with four M10 x 25mm Button Head Bolts (87), and four M10 Lock Washers (103).
Attach the Name Plate (89) to the Lat Tower (4) with two M4 x 16mm Screws (62).
7.Press a 38mm Round Inner Cap (38) into each end of the Lat Tower Crossbar (10).
Attach two Eyebolts (34) to the Lat Tower Crossbar (10) with two M8 Washers (59) and two M8 Nylon Locknuts (65). Do not overtighten the
Locknuts; the Eyebolts must be able to rotate freely.
Attach the Lat Tower Crossbar (10) to the Lat Tower (4) with two M10 x 65mm Button Head Bolts (70), two M10 Washers (75), and the Crossbar Cover (93). Be sure that the Eyebolts (34) are oriented as shown in the inset draw- ing. If they are not, turn the Lat Tower Crossbar around and reattach it.
8.Attach the Leg Lever Bumper (55) to the Front Leg (6) with an M4 x 19mm Screw (77).
Press two 45mm Square Inner Caps (42) into the Leg Lever (7).
Lubricate an M10 x 68mm Button Head Bolt (56) with grease. Orient the Leg Lever (7) with the slot on the side shown. Attach the Leg Lever to the Front Leg (6) with the Bolt and an M10 Nylon Locknut (76). Do not overtighten the Nylon
Locknut; the Leg Lever must be able to pivot easily.
6 |
|
|
|
|
| 4 |
|
|
| 103 87 |
|
62 |
| 87 |
|
89 |
|
| |
62 |
|
| |
|
|
| |
|
| 103 |
|
|
| 3 |
|
7 |
|
|
|
70 |
|
|
|
65 | 75 |
|
|
59 |
|
| |
93 |
|
| |
|
|
| |
38 |
| 10 |
|
|
|
| |
34 |
| 65 |
|
|
|
| |
|
| 59 |
|
|
| 38 |
|
|
| 34 | 4 |
|
|
| |
Side View |
|
|
|
10 |
|
|
|
4 |
|
|
|
34 |
|
|
|
8 | Lubricate |
| |
|
| ||
| 56 |
|
|
42 |
|
|
|
| 6 |
|
|
7 | Slot | 76 |
|
| 55 |
| |
|
|
| |
42 | 77 |
|
|
|
|
| |
7
