page no.
4
Outdoor Fire Pit
Assembly Instructions
For Easiest Assembly:
To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.
Clear an area large enough to layout all components and hardware.
When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware.
Follow all steps in order to properly assemble your product.
Step Assemble legs
1Attach legs to hearth using 16 sets of hex screws (B) and lock washers (E).
Step Attach bowl support
2Attach bowl support to legs using 4 hex screws (B).
Step
4
Step
5
Step
6
Insert bottom bowl
Insert bottom bowl onto bowl support.
Insert wood grate
Insert wood grate into bottom bowl.
Assemble spark arrestor
Attach the handle to spark arrestor using large nut (D).
Step Assemble bottom bowl
3Attach ash receiver to bottom bowl using 3 sets of screw (A) and small nut (C).
Step Place spark arrestor
7A. Place spark arrestor onto bottom bowl.
B. Use fire tool to remove and replace spark arrestor.
